Wire Harness Design Engineer

🏢 Summary: Hybrid Harness / Mechanical Integration Engineer role focused on low-voltage electrical system integration in vehicles, combining harness routing, mechanical packaging, and hands-on prototype support. The position involves end-to-end ownership of routing strategies, mechanical retention design, CAD documentation, and build validation in real vehicle environments. Ideal for an independent engineer experienced in constrained vehicle integration and fast iteration cycles. 🗂️ Requirements: Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related field, 5+ years of experience in automotive, robotics, aerospace, or similar industries, Strong experience with harness routing and mechanical packaging in constrained vehicle environments, Proficiency in CAD tools and creation of 2D drawings, Experience driving designs through release and change control processes, Understanding of DFM/DFA and tolerance stack-ups, Knowledge of manufacturing methods: sheet metal, machining, injection molding, additive prototyping, Practical knowledge of harness integration best practices (bend radius, strain relief, chafe protection, heat avoidance), Ability to independently own integration problems and deliver manufacturable solutions, Experience supporting prototype builds and working directly with hardware and technicians 📃 Skills: CAD, CATIA, NX, SolidWorks, GD&T, DFM, DFA, PLM, ECO, CAN, LIN, EMC, SiemensCapital, 3DX 🏢 Description: Location: Foster City, CA We're looking for a highly self-sufficient engineer who can operate as a hybrid Harness / Mechanical Integration Engineer to enable fast, safe, and serviceable implementation of low-voltage electrical systems in vehicles. This role bridges harness routing/retention and mechanical packaging, focusing on practical solutions such as brackets, clips, clamps, channels, strain relief, and protective features to ensure electrical components and harnesses can be installed reliably in real vehicles. The ideal candidate can independently take loosely defined integration problems, drive the design to a manufacturable solution, and support prototype builds with minimal guidance. Responsibilities • Own end-to-end harness mechanical integration for assigned vehicle areas: define routing/retention strategy, identify constraints, and drive implementation through release and build support • Independently design and iterate mechanical retention solutions for harnesses and LV components (brackets, clamps, clips, tie features, channels, grommet interfaces, protective covers, strain relief) with clear installation intent • Lead packaging and routing studies in-vehicle: measure, model, manage clearances, avoid chafe/heat/sharp edges, ensure service access, and account for build variation and tolerance stack-ups • Create complete CAD and release-ready documentation: ○ 3D CAD + 2D drawings for brackets/mounts/retainers (GD&T as needed) ○ Harness routing/retention definition and installation guidance sufficient for technicians and build teams ○ BOMs, fastener specs, torque requirements, and assembly steps • Coordinate and support prototype builds / fit-checks: drive fast design loops to closure based on real vehicle feedback • Proactively identify integration risks (rattles, loosening, chafe, interference, thermal proximity, ingress, accessibility) and implement prevention strategies • Partner with EE, Vehicle System Integration, Vehicle Integration, Geometric Integration and Manufacturing to deliver stable, serviceable solutions Qualifications • Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related field with 5+ years' experience in automotive/robotics/aerospace or similar • Demonstrated ability to work independently and deliver with minimal oversight • Strong hands-on experience with harness routing/retention and/or mechanical packaging in constrained vehicle environments • Proficiency with CAD (e.g., CATIA, NX, SolidWorks) and 2D drawings; comfortable driving designs through release/change control • Solid understanding of DFM/DFA, tolerance stack-ups, and manufacturing methods (sheet metal, machining, injection molded clips, additive prototyping) • Practical knowledge of harness integration best practices: bend radius, strain relief, branch management, clip spacing, chafe protection, heat avoidance, edge protection, grommet usage, service loops, installation sequencing • Comfortable working directly with hardware, vehicles, and technicians in fast iteration cycles • Strong communication and documentation skills Bonus Qualifications • Master's degree in Mechanical Engineering or Electrical Engineering • Experience with harness design tools (e.g., Siemens Capital, CATIA/3DX, NX) and release workflows (PLM, ECO/CR) • Familiarity with automotive networks and electrical integration constraints (CAN/LIN routing considerations, grounding, EMC-sensitive routing) • Experience defining fastener strategy and durability considerations (vibration, corrosion, thermal, ingress/IP needs) • Experience building or supporting test fixtures / special equipment for lab or vehicle work Salary Range • $110,000–120,000 • Actual salary dependent on experience, skills, and qualifications Compliance Notice Alten USA is a federal contractor and Equal Opportunity Employer. All candidates selected for employment must successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: The role focuses on embedded hardware design for automotive electronic control units, covering schematic and multilayer PCB layout, EMI/EMC compliance, vehicle network integration, and system-level architecture. It involves hardware debugging, thermal management, and participation in design reviews for advanced automotive systems such as ADAS and infotainment. 🗂️ Requirements: BS/MS in Electrical, Electronics, Computer or Aerospace Engineering, Automotive industry experience (Tier1/Tier2 preferred), Experience in embedded electrical design, Knowledge of EMI/EMC design, testing and troubleshooting, Understanding of ISO 26262 and automotive standards, Experience with vehicle networks (CAN, LIN, ETH, LVDS), Minimum 2 years schematic and PCB layout design, Experience with high-complexity multilayer PCB design, Ability to perform hardware debugging using lab equipment, Knowledge of ECU thermal management 📃 Skills: Altium, CAN, LIN, Ethernet, LVDS, ISO26262, EMI, EMC, PCB, ECU, ADAS, Infotainment, GPU, CPU, NPU 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.Basic Qualifications BS / MS in Electrical, Electronics, Compute, Aerospace Engineering, or equivalent Experienced in automotive industry. (TIER1/TIER2 preferred) Experience in embedded electrical designs Familiar with EMI/EMC design, test and troubleshooting Familiar with electrical architecture topologies, Functional Safety (ISO 26262) and other industry standards Solid understanding of system/component design Familiar with vehicle bus, e.g. ETH/CAN/LIN/LVDS, communication protocols and troubleshooting tools Experience in thermal management of ECU embedded electronics Ability to participate and lead schematic and layout design reviews Good knowledge of state-of-the-art hardware systems, software tools and algorithms for interfaces required for actuators, firmware development, in-vehicle bus architectures, in-vehicle CPU/GPU/NPU computing platforms, image and audio signal processors, connectivity Knowledge of ADAS, Infotainment Systems and Zonal Architectures, Software defined vehicles Being able to support more than one expertise domain is a plus Power Integrity and Signal Integrity experience is a plus Experience in an architectural hardware/system role is a plus Should have experience in: Min 2 Yrs. Schematic and Layout design Experience in Altium is a big plus High complex multilayer layout design PCB design rules PCB to Mechanical interface and constraints HW debugging, investigations, problem solving with electrical lab equipment ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Electrical Engineer role focused on planning, designing, installing, and maintaining plant electrical infrastructure and facility systems while improving energy efficiency and managing engineering projects. The position involves supporting industrial equipment, troubleshooting complex systems, and coordinating construction and maintenance activities. Candidates will work on multiple projects within plant operations and infrastructure environments. 🗂️ Requirements: BS in Electrical Engineering or Electrical Engineering Technology, Minimum 5 years of Plant or Facility Engineering experience, Experience with plant electrical infrastructure and facility systems, Knowledge of National Electric Code (NFPA) and NFPA 70E, Ability to interpret technical drawings and prints, Experience managing engineering projects, Proficiency in AutoCAD, Proficiency in Microsoft Office, Ability to work in industrial environments 📃 Skills: AutoCAD, Microsoft, Excel, Word, PowerPoint, NFPA, NFPA70E, HVAC, Boilers, Compressors, Chillers, UPS, Ethernet, Fiber, ElectricalDistribution, 15kV, 480V, 120V 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.Job Description: Perform engineering duties of planning, designing, installing, and maintenance of electrical systems for the plant facility & operations areas. Improve the energy efficiency of operating infrastructure & manufacturing equipment to reduce the overall energy costs. Manage and coordinate small and large engineering projects. Job Functions: Estimate, plan, design, and implement the construction and maintenance of plant infrastructure. Specify equipment and systems to support plant infrastructure and facility processes. Troubleshoot and solve problems related to the plant infrastructure and facility processes. Support plant infrastructure and facility process equipment which includes, but is not limited to: boilers, compressors, chillers, HVAC systems, electrical distribution systems (15kV, 480V, 120V), standby generator & UPS systems, fiber optic & Ethernet communication systems, Life Safety systems (smoke & fire detection, annunciation & notification, fire suppression), security systems (card access, camera, gate control), lighting. Plan & coordinate work with skilled in-house tradesman & supervisors, as well as outside contractors & service technicians. Provide and implement designs for electrical infrastructure equipment and systems. Working knowledge & practical use of National Electric Code (NFPA) & NFPA 70E Standard for Electrical Safety in the Workplace. Participate in teams and cross-functional groups. Work on multiple projects simultaneously with minimal supervision. Project management and plant engineering functions. Candidate Requirements: BS degree in Electrical Engineering or Electrical Engineering Technology (or equivalent), and at least five years Plant Engineering or Facility Engineering experience. Computer Skills: Microsoft Office (Word, Excel, PowerPoint), AutoCAD. Effective oral and written communication skills. High level of interpersonal skills to work effectively with others. High level of analytical ability to solve complex problems. Ability to interpret prints and drawings. Understanding of building, infrastructure, and utility functions. Ability to work in an industrial work environment ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Electrical Engineer role focused on designing and developing electrical systems for robotic platforms, including schematics, PCB layouts, prototyping, and system integration. The position involves hardware bring-up, debugging, testing, and cross-functional collaboration to ensure reliable product performance. Offers a competitive salary range and opportunity to work on advanced engineering projects. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related field, Experience with electrical design, prototyping, and debugging, Experience working with hardware systems, Familiarity with lab tools (oscilloscopes, multimeters, power supplies, logic analyzers), Ability to perform testing and validation activities, Strong problem-solving skills, Ability to work in a fast-paced development environment 📃 Skills: PCB, Schematics, Debugging, Prototyping, DVT, Oscilloscopes, Multimeters, PowerSupplies, LogicAnalyzers, EmbeddedSystems, Sensors, Actuators, MotorControl, BenchTesting, SystemIntegration 🏢 Description: As an Electrical Engineer you will be responsible for: Design and develop electrical systems and circuits for robotic platforms, including schematics, PCB layouts, and system integration. Support prototype builds, including wiring, bring‑up, debugging, and validation of hardware systems. Troubleshoot and resolve electrical and system-level issues during development and testing. Assist with Design Verification Testing (DVT) and other validation activities to ensure product performance and reliability. Collaborate cross‑functionally with mechanical, embedded software, and systems engineering teams to ensure seamless system integration. Perform bench testing, data collection, and analysis to evaluate system performance and identify improvements. Document designs, test results, and troubleshooting findings to support development and future production. Qualifications: Bachelor's degree in Electrical Engineering or related field. Experience with electrical design, prototyping, and debugging (robotics or hardware systems preferred). Familiarity with lab tools such as oscilloscopes, multimeters, power supplies, and logic analyzers. Exposure to embedded systems, sensors, actuators, or motor control is a plus. Experience with testing and validation (DVT or similar) is preferred but not required. Strong problem‑solving skills and ability to work in a fast‑paced development environment. Salary Range: $120k-$170k

🏢 Summary: The offer is for an Electrical Engineer responsible for designing and developing electrical systems for robotic platforms, including schematics, PCB layouts, system integration, and hardware validation. The role involves prototype support, troubleshooting, design verification testing, and cross-functional collaboration with mechanical and embedded software teams. It is suited for candidates with strong hands-on experience in electrical design, debugging, and lab-based testing within fast-paced development environments. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related field, Experience with electrical design, prototyping, and debugging, Ability to design schematics and PCB layouts, Experience troubleshooting hardware and system-level issues, Familiarity with lab tools (oscilloscopes, multimeters, power supplies, logic analyzers), Experience supporting prototype builds and system bring-up, Ability to perform testing and validation activities (DVT or similar), Ability to document designs and test results 📃 Skills: PCB, Schematics, Debugging, DVT, Oscilloscope, Multimeter, PowerSupplies, LogicAnalyzers, EmbeddedSystems, Sensors, Actuators, MotorControl, BenchTesting, SystemIntegration 🏢 Description: As an Electrical Engineer you will be responsible for: Design and develop electrical systems and circuits for robotic platforms, including schematics, PCB layouts, and system integration. Support prototype builds, including wiring, bring‑up, debugging, and validation of hardware systems. Troubleshoot and resolve electrical and system-level issues during development and testing. Assist with Design Verification Testing (DVT) and other validation activities to ensure product performance and reliability. Collaborate cross‑functionally with mechanical, embedded software, and systems engineering teams to ensure seamless system integration. Perform bench testing, data collection, and analysis to evaluate system performance and identify improvements. Document designs, test results, and troubleshooting findings to support development and future production. Qualifications: Bachelor's degree in Electrical Engineering or related field. Experience with electrical design, prototyping, and debugging (robotics or hardware systems preferred). Familiarity with lab tools such as oscilloscopes, multimeters, power supplies, and logic analyzers. Exposure to embedded systems, sensors, actuators, or motor control is a plus. Experience with testing and validation (DVT or similar) is preferred but not required. Strong problem‑solving skills and ability to work in a fast‑paced development environment. Salary Range: $120k-$170k Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Engineering role focused on industrial/automotive embedded hardware electronics design, including schematic capture, PCB layout, circuit analysis, and system-level architecture. The position involves working on complex multilayer boards, vehicle communication networks, and ensuring EMI/EMC, thermal, and safety compliance. Candidates will support design reviews, simulations, and reliability analyses across the product development cycle. 🗂️ Requirements: Bachelor’s degree in Electrical, Electronic, or Aerospace Engineering, Experience in industrial or automotive hardware electronics design, Understanding of embedded electronics design constraints, Knowledge of system/component design and EE architecture topologies, Proficiency in analog and digital circuit analysis, Experience with vehicle communication protocols (ETH, CAN FD, LIN, LVDS), Experience with EMI/EMC design, testing, and troubleshooting, Experience with thermal management for ECU embedded electronics, Ability to conduct schematic and PCB layout design reviews, Experience performing DFMEA, Experience with circuit simulation tools (e.g., LTSpice), Minimum 3–6 years of experience with Altium (or equivalent), Experience with high-complexity multilayer PCB design, Knowledge of PCB stack-up, design rules, and mechanical interfaces 📃 Skills: Altium, LTSpice, CAN, LIN, ETH, LVDS, EMI, EMC, DFMEA, PCB, ECU, Analog, Digital, SI, PI 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. Basic Qualifications Bachelor of Science in Electrical, Electronic, Aerospace Engineering, or equivalent program. Master Degree is a Plus. Experienced in industrial or automotive Hadware Electronics design (preferred) area (TIER1...) Understanding with embedded electronics design constraints Familiar with system/component design, EE architecture topologies and safety Solid understanding of system/component design. Solid Understanding of Analog and Digital analysis of circuits. Familiar with vehicle bus: ETH/CAN FD/LIN/LVDS communication protocols and troubleshooting tools Familiar with EMI/EMC design, test and troubleshooting Familiar with experience in thermal management for ECU embedded electronics Being able to support/handle more than one expertise domain as a plus Ability to participate and leading schematic and layout design reviews Experience performing Design Failure Mode and Effect Analysis. Experience performing Circuit Simulations with LTSpice or similar tool. Experience performing Worst Case Circuit Analysis is a plus Should have experience in: Altium tool min 3-6 Yrs (or equivalent tool) Altium Schematic Capture (or equivalent tool). Altium PCB Layout review (or equivalent tool). High complex multilayer layout design PCB layer stack-up design. PCB design rules. PCB to Mechanical interfaces. PI/SI justified experience is a plus ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Embedded Hardware Design Engineer role focused on developing, validating, and integrating automotive electronic hardware systems, including schematic design, PCB development, debugging, and functional safety compliance. The position involves cross-functional collaboration on embedded systems for modern automotive platforms such as ADAS, infotainment, and software-defined vehicles. 🗂️ Requirements: Bachelor's or Master's degree in Electrical Engineering, Electronics Engineering, Computer Engineering, Aerospace Engineering, or related discipline, Experience in the automotive industry, Experience designing embedded electronic hardware systems, Knowledge of EMI/EMC design principles and testing, Understanding of vehicle electrical architectures and ISO 26262, Experience with Ethernet, CAN, LIN, and LVDS protocols, Minimum 2 years of experience in schematic capture and PCB layout design, Experience designing multilayer PCBs, Proficiency with Altium Designer, Experience with hardware debugging, failure analysis, and root cause investigation, Proficiency with oscilloscopes, power supplies, and logic analyzers 📃 Skills: Altium, PCB, EMI, EMC, Ethernet, CAN, LIN, LVDS, ISO26262, ADAS, SDV, PI, SI, Oscilloscopes, Debugging, Schematic, Hardware, ECU 🏢 Description: The Hardware Design Engineer is responsible for the design, development, analysis, integration, and validation of embedded electronic hardware systems for automotive applications. This role requires applying engineering principles and independent technical judgment to develop reliable, safe, and high-performance hardware solutions that meet customer, regulatory, and industry requirements. The engineer will work closely with systems, software, mechanical, manufacturing, and validation teams throughout the product development lifecycle, supporting architecture definition, schematic design, PCB development, hardware integration, troubleshooting, and technical problem resolution. Basic Qualifications - Bachelor's or Master's degree in Electrical Engineering, Electronics Engineering, Computer Engineering, Aerospace Engineering, or a related discipline. - Experience within the automotive industry (Tier 1 or Tier 2 supplier experience preferred). - Experience designing and developing embedded electronic hardware systems. - Knowledge of EMI/EMC design principles, testing methodologies, and troubleshooting techniques. - Understanding of vehicle electrical architectures, Functional Safety (ISO 26262), and automotive industry standards. - Strong understanding of system-level and component-level hardware design. - Familiarity with automotive communication networks and protocols including Ethernet (ETH), CAN, LIN, and LVDS. - Experience with thermal management considerations for ECU and embedded electronic designs. - Ability to participate in and lead schematic reviews, PCB layout reviews, and design evaluations. - Knowledge of modern automotive hardware platforms, embedded processing systems, connectivity technologies, and interface architectures. - Understanding of ADAS, Infotainment Systems, Zonal Architectures, and Software Defined Vehicle (SDV) concepts. - Ability to support multiple technical domains is considered an advantage. - Experience with Power Integrity (PI) and Signal Integrity (SI) analysis is preferred. - Prior experience in hardware architecture or system architecture roles is a plus. Required Technical Experience - Minimum 2 years of experience in schematic capture and PCB layout design. - Experience using Altium Designer is highly preferred. - Experience designing high-complexity, multilayer printed circuit boards (PCBs). - Strong understanding of PCB design rules, constraints, and best practices. - Experience managing PCB-to-mechanical integration requirements and packaging constraints. - Hands-on experience with hardware bring-up, debugging, failure analysis, and root cause investigations. - Proficiency using electrical laboratory equipment including oscilloscopes, power supplies, logic analyzers, and related test equipment. - Ability to analyze technical issues and provide engineering recommendations for corrective actions and design improvements. Key Responsibilities - Design, develop, and validate embedded hardware solutions for automotive electronic systems. - Support hardware architecture development, schematic design, and PCB layout activities. - Conduct technical reviews and provide engineering recommendations to improve product performance, reliability, manufacturability, and safety. - Perform hardware debugging, testing, validation, and root cause analysis of complex electrical issues. - Collaborate with cross-functional engineering teams to support system integration and product development activities. - Evaluate technical requirements and translate them into hardware design solutions. - Support compliance with automotive standards, customer requirements, and functional safety objectives. - Participate in design reviews, risk assessments, and engineering problem-solving activities throughout the product lifecycle. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Design and develop embedded electronic hardware systems for automotive applications, covering architecture definition, schematic design, PCB development, integration, and validation. The role involves working across cross-functional teams to deliver reliable, safe, and high-performance hardware compliant with automotive standards. Candidates will support hardware bring-up, debugging, testing, and technical problem resolution throughout the product lifecycle. 🗂️ Requirements: Bachelor’s or Master’s degree in Electrical, Electronics, Computer, Aerospace Engineering or related field, Automotive industry experience (Tier 1 or Tier 2 preferred), Experience designing embedded electronic hardware systems, Knowledge of EMI/EMC design and testing, Understanding of vehicle electrical architectures and ISO 26262, Minimum 2 years of schematic capture and PCB layout design experience, Experience designing high-complexity multilayer PCBs, Proficiency with Altium Designer, Experience with hardware bring-up, debugging, and root cause analysis, Proficiency with laboratory equipment (oscilloscopes, power supplies, logic analyzers), Familiarity with automotive communication protocols (Ethernet, CAN, LIN, LVDS) 📃 Skills: Altium, PCB, EMI, EMC, ISO26262, Ethernet, CAN, LIN, LVDS, PI, SI, Oscilloscope, ADAS, Infotainment 🏢 Description: The Hardware Design Engineer is responsible for the design, development, analysis, integration, and validation of embedded electronic hardware systems for automotive applications. This role requires applying engineering principles and independent technical judgment to develop reliable, safe, and high-performance hardware solutions that meet customer, regulatory, and industry requirements. The engineer will work closely with systems, software, mechanical, manufacturing, and validation teams throughout the product development lifecycle, supporting architecture definition, schematic design, PCB development, hardware integration, troubleshooting, and technical problem resolution. Basic Qualifications Bachelor's or Master's degree in Electrical Engineering, Electronics Engineering, Computer Engineering, Aerospace Engineering, or a related discipline. Experience within the automotive industry (Tier 1 or Tier 2 supplier experience preferred). Experience designing and developing embedded electronic hardware systems. Knowledge of EMI/EMC design principles, testing methodologies, and troubleshooting techniques. Understanding of vehicle electrical architectures, Functional Safety (ISO 26262), and automotive industry standards. Strong understanding of system-level and component-level hardware design. Familiarity with automotive communication networks and protocols including Ethernet (ETH), CAN, LIN, and LVDS. Experience with thermal management considerations for ECU and embedded electronic designs. Ability to participate in and lead schematic reviews, PCB layout reviews, and design evaluations. Knowledge of modern automotive hardware platforms, embedded processing systems, connectivity technologies, and interface architectures. Understanding of ADAS, Infotainment Systems, Zonal Architectures, and Software Defined Vehicle (SDV) concepts. Ability to support multiple technical domains is considered an advantage. Experience with Power Integrity (PI) and Signal Integrity (SI) analysis is preferred. Prior experience in hardware architecture or system architecture roles is a plus. Required Technical Experience Minimum 2 years of experience in schematic capture and PCB layout design. Experience using Altium Designer is highly preferred. Experience designing high-complexity, multilayer printed circuit boards (PCBs). Strong understanding of PCB design rules, constraints, and best practices. Experience managing PCB-to-mechanical integration requirements and packaging constraints. Hands-on experience with hardware bring-up, debugging, failure analysis, and root cause investigations. Proficiency using electrical laboratory equipment including oscilloscopes, power supplies, logic analyzers, and related test equipment. Ability to analyze technical issues and provide engineering recommendations for corrective actions and design improvements. Key Responsibilities Design, develop, and validate embedded hardware solutions for automotive electronic systems. Support hardware architecture development, schematic design, and PCB layout activities. Conduct technical reviews and provide engineering recommendations to improve product performance, reliability, manufacturability, and safety. Perform hardware debugging, testing, validation, and root cause analysis of complex electrical issues. Collaborate with cross-functional engineering teams to support system integration and product development activities. Evaluate technical requirements and translate them into hardware design solutions. Support compliance with automotive standards, customer requirements, and functional safety objectives. Participate in design reviews, risk assessments, and engineering problem-solving activities throughout the product lifecycle. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Engineering role focused on automotive interior seat systems, responsible for design, development, validation, and release of components using advanced quality and performance methodologies. The position involves cross-functional leadership, supplier management, and feasibility analysis for injection molded and decorative parts. Candidates will apply DFSS principles, CAD tools, and validation methods to deliver high-quality interior products. 🗂️ Requirements: Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Computer Engineering or MBA from ABET accredited university, Experience in automotive interior product design and seat systems development, Knowledge of performance standards, master sections and surface feasibility proposals, Design for Six Sigma (DFSS) experience (Green or Black Belt preferred), Knowledge of DFMEA and DVP&R, Experience with tooling feasibility for injection molded plastics and decorative components, Proficiency in NX and Teamcenter, Understanding of FEA, Mold Flow validation and GD&T, Strong technical knowledge of plastic and metal component design and system interfaces, Experience leading suppliers and cross-functional engineering teams, Ability to manage multiple complex projects simultaneously, Willingness to travel to suppliers and assembly plants (including Canada and Mexico), Strong MS Office skills 📃 Skills: NX, Teamcenter, DFSS, Shainin, DFMEA, DVP&R, FEA, Moldflow, GD&T, i-Speed, MSOffice 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.Job Summary: The Seating Heat & Ventilation Design Release Engineer (DRE) is responsible for the end-to-end design, development, validation, and launch of heated and ventilated seat systems across Client vehicle programs. This role owns the technical definition, release, and ongoing quality performance of the seat thermal comfort features, working closely with cross-functional teams and external suppliers to deliver best-in-class customer comfort, quality, and value. Key Responsibilities: Own the design and release of seat heating and ventilation components and systems (heatermats, blowers, plenums, foam interfaces, harnesses, etc.) from concept through production. Develop and maintain component and system-level technical specifications, design documents, and engineering standards for heated and ventilated seating. Lead packaging and integration of heat and ventilation systems into seat complete/structures and foam, ensuring compliance with ergonomics, safety, comfort, manufacturability, and serviceability requirements. Create and maintain engineering documentation in Client systems (e.g., part numbers, BOMs, drawings, 3D dataetc). Coordinate with suppliers on design proposals, DFMEAs, DVP&Rs, timing plans, and cost/feasibility studies; drive robust design solutions that meet Client performance targets. Plan and execute validation activities for seat heat & ventilation systems, including thermal performance testing, durability, environmental, and regulatory compliance. Analyze test data, identify root cause of issues, and drive corrective actions and design changes to closure. Support vehicle builds (mules, pilots, PPAP, launch) by resolving fit, finish, function, and electrical/thermal performance issues in a timely manner. Collaborate with Electrical, HVAC, HMI, Body, and Vehicle Integration teams to ensure seamless system operation, proper network communication (LIN/CAN), and robust control strategies. Manage engineering changes (CNs/ECNs), cost reductions, and quality improvements for in-production programs. Support functional safety, compliance, and regulatory requirements as applicable (thermal safety, occupant comfort and health, electrical safety, etc.). Track and report program status, risks, and open issues to management and program teams; maintain clear and organized openissue lists. Benchmark competitive seat comfort technologies and contribute to Client seating innovation roadmaps for thermal comfort and wellbeing. Qualifications & Skills: Demonstrated leadership skills, ability to work autonomously, excellent communication skills, positive attitude, willingness to learn, flexibility, team-player, and attention to detail. Bachelor's Degree in Mechatronics Engineering, Electrical Engineering, or Mechanical Engineering from an ABET-accredited university. 5+ years of engineering experience in the automotive industry. Hands-on experience with heated/ventilated/cooled seat systems, including interaction with foam, trim, HVAC, Modules and seat structures. Working knowledge of engineering fundamentals in thermodynamics, heat transfer, fluid flow, and/or HVAC integration. Prior experience in a Design Release Engineer (DRE) or System Responsible Engineer role at an OEM or Tier 1 supplier Proficiency with 3D CAD tools (CATIA, NX, or equivalent) for packaging and design review (detailed design experience is a plus). Experience with standard engineering tools and processes: DFMEA, DVP&R, root cause analysis, design reviews, and problem-solving methodologies. Experience with global project management and leading cross-functional teams. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: The role involves designing, validating, and improving electronic systems for automotive applications, including circuit development, schematic design, and product validation. The engineer will troubleshoot issues, perform root-cause and worst-case analyses, and resolve EMC-related problems while collaborating with cross-functional teams. The position requires strong experience in electronic circuit design and hands-on validation within an automotive context. 🗂️ Requirements: Bachelor’s degree in Electrical Engineering, Electronics, or related field, Minimum 4 years of experience in electronic circuit design, Experience designing electronic circuits with microcontrollers and sensors, Hands-on experience in troubleshooting, failure analysis, and product validation, Experience performing EMC investigations and implementing improvements, Proficiency in schematic design using Mentor Graphics DxDesigner, Knowledge of worst-case analysis methods 📃 Skills: Microcontrollers, Sensors, EMC, DxDesigner, SPICE, Oscilloscopes, SpectrumAnalyzers, ISO, AEC-Q 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.Overview The successful candidate will contribute to the design, validation, and improvement of electronic systems for automotive applications, working closely with internal teams and customers. Key Responsibilities Design and develop electronic circuits including microcontrollers, sensors, and system interfaces. Create and validate schematic designs according to customer requirements and industry standards. Support product validation activities, analyze failures, and implement corrective actions. Perform root-cause analysis on warranty returns and validation issues. Investigate and resolve EMC‑related problems. Conduct worst-case analysis to ensure robust design performance. Collaborate with cross‑functional teams (software, mechanical, manufacturing). Required Skills & Qualifications Bachelor's degree in Electrical Engineering, Electronics, or related field. Minimum 4 years of experience in electronic circuit design. Strong understanding of electronic circuits, microcontrollers, sensors, and system architectures. Hands‑on experience in troubleshooting, failure analysis, and product validation. Proven ability to analyze and solve complex technical issues. Experience with EMC investigations and improvements. Proficiency with Mentor Graphics DxDesigner for schematic development. Knowledge of worst-case analysis methods. Nice to Have Experience with automotive design standards (ISO, AEC‑Q, etc.). Familiarity with simulation and lab test equipment (SPICE, oscilloscopes, spectrum analyzers). Soft Skills Strong communication skills and teamwork mindset. Ability to work efficiently in a fast-paced, deadline-driven environment. Proactive and solution‑oriented attitude ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.