Closures System Engineer

🏢 Summary: Engineering role focused on designing and developing automotive window regulator and door glass components while coordinating with cross-functional teams throughout the product lifecycle. The position involves component validation, issue resolution, and ensuring compliance with timing, cost, and technical requirements in automotive engineering projects. 🗂️ Requirements: Bachelor's degree in Mechanical Engineering or related field, 3–6 years of automotive engineering experience, Experience with window regulators or door glass systems, Experience with closures systems, Project coordination skills, Strong communication skills 📃 Skills: Mechanical, Automotive, Closures, Validation, Testing, Manufacturing, Quality 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. Key Responsibilities: • Lead the design, development, and release of window regulator and/or door glass components • Coordinate with cross-functional teams (suppliers, manufacturing, quality, and vehicle integration) • Manage component validation, testing, and issue resolution • Ensure compliance with program timing, cost, and technical requirements • Support change management and continuous improvement activities Qualifications: • Bachelor's degree in Mechanical Engineering or related field • 3–6 years of experience in automotive engineering, preferably with closures systems • Experience with window regulators, door glass systems, or closely related components • Strong communication and project coordination skills All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Onsite Interior Systems Engineer role focused on concept development and detailed design of vehicle instrument panel and hard trim systems, from early development through production launch. The position involves creating system requirements, developing 3D geometry, ensuring regulatory compliance, and delivering high-quality fit and finish in collaboration with cross-functional teams. Candidates will support full vehicle interior component engineering, including crash performance, manufacturing feasibility, and production release. 🗂️ Requirements: B.S. in Mechanical Engineering or equivalent education and experience, 1–5 years of experience designing and releasing interior subsystems and adjoining parts, Experience with component manufacturing and assembly processes, Experience using 3D CAD software (NX, Catia, 3DX or similar), Experience in production release process, Experience launching a new product in a factory setting, System-level management experience, Team lead experience 📃 Skills: CAD, NX, Catia, 3DX, GD&T, Enovia, Confluence, Jira, Asana, MicrosoftOffice 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.The Interior Systems Engineer-Instrument Panels will be responsible for concept development and detailed design of the cabin systems through multiple stages of development. You will Conceptualize, Design, Engineer, Develop and support the launch of full vehicle interior components. Fully ONSITE in Long Beach, CA What you'll do... Create and develop Hard Trim System requirements and specifications while developing geometry and the engineering execution in conjunction with design, supply chain, and other core teams. Create vehicle-aligned component and system targets for function, cost, weight and investment. Develop 3D geometry and innovative designs concepts that solve challenging crash load cases while balancing construction, material, and manufacturing methods Optimize the concepts and designs with analytical and physical assessments, ensuring conformation to federal regulations governing assigned systems. Deliver world-class craftsmanship and fit/finish through the proper implementation of GD&T. Develop, study, and implement novel construction techniques and materials then drive them to production feasibility Enable effective communications with Studio, Packaging, Advanced Engineering, Manufacturing, and Supplier activities to deliver optimal design solutions Support presentations of concepts and status to senior management and internally to Company personnel You'll have... B.S. in Mechanical Engineering or equivalent combination of relevant education and experience. 1-5 years of experience designing, developing, and releasing one or more interior subsystem and adjoining parts including component manufacturing and assembly processes Experience using 3D CAD software collaboratively (NX, Catia, 3DX, etc.) Team lead experience Experience in the production release process Experience in a factory setting launching a new product System level management experience Even better, you may have... Master's Degree in Engineering Excellent understanding of GD&T standards High level of expertise and proficiency with Catia, Enovia, or similar tools including drawing and modeling practices and methodologies Hands-on experience building and launching automotive products Experience with Microsoft Office applications and other information management tools Strong written and verbal communication skills A degree in Mechanical Engineering, Certificate of Accomplishment from a recognized Design educational institution, or equivalent skills and expertise Experience using Confluence, Jira, Asana, or other project management tools An eagerness to work cross-functionally in a dynamic environment where you are part of a high performing team A system approach to design and development with the desire and curiosity to strive for exceptional delivery execution and continuous improvement Salary Range: $100,000-$125,000/K The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Hybrid Harness / Mechanical Integration Engineer role focused on low-voltage electrical system integration in vehicles, combining harness routing, mechanical packaging, and hands-on prototype support. The position involves end-to-end ownership of routing strategies, mechanical retention design, CAD documentation, and build validation in real vehicle environments. Ideal for an independent engineer experienced in constrained vehicle integration and fast iteration cycles. 🗂️ Requirements: Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related field, 5+ years of experience in automotive, robotics, aerospace, or similar industries, Strong experience with harness routing and mechanical packaging in constrained vehicle environments, Proficiency in CAD tools and creation of 2D drawings, Experience driving designs through release and change control processes, Understanding of DFM/DFA and tolerance stack-ups, Knowledge of manufacturing methods: sheet metal, machining, injection molding, additive prototyping, Practical knowledge of harness integration best practices (bend radius, strain relief, chafe protection, heat avoidance), Ability to independently own integration problems and deliver manufacturable solutions, Experience supporting prototype builds and working directly with hardware and technicians 📃 Skills: CAD, CATIA, NX, SolidWorks, GD&T, DFM, DFA, PLM, ECO, CAN, LIN, EMC, SiemensCapital, 3DX 🏢 Description: Location: Foster City, CA We're looking for a highly self-sufficient engineer who can operate as a hybrid Harness / Mechanical Integration Engineer to enable fast, safe, and serviceable implementation of low-voltage electrical systems in vehicles. This role bridges harness routing/retention and mechanical packaging, focusing on practical solutions such as brackets, clips, clamps, channels, strain relief, and protective features to ensure electrical components and harnesses can be installed reliably in real vehicles. The ideal candidate can independently take loosely defined integration problems, drive the design to a manufacturable solution, and support prototype builds with minimal guidance. Responsibilities • Own end-to-end harness mechanical integration for assigned vehicle areas: define routing/retention strategy, identify constraints, and drive implementation through release and build support • Independently design and iterate mechanical retention solutions for harnesses and LV components (brackets, clamps, clips, tie features, channels, grommet interfaces, protective covers, strain relief) with clear installation intent • Lead packaging and routing studies in-vehicle: measure, model, manage clearances, avoid chafe/heat/sharp edges, ensure service access, and account for build variation and tolerance stack-ups • Create complete CAD and release-ready documentation: ○ 3D CAD + 2D drawings for brackets/mounts/retainers (GD&T as needed) ○ Harness routing/retention definition and installation guidance sufficient for technicians and build teams ○ BOMs, fastener specs, torque requirements, and assembly steps • Coordinate and support prototype builds / fit-checks: drive fast design loops to closure based on real vehicle feedback • Proactively identify integration risks (rattles, loosening, chafe, interference, thermal proximity, ingress, accessibility) and implement prevention strategies • Partner with EE, Vehicle System Integration, Vehicle Integration, Geometric Integration and Manufacturing to deliver stable, serviceable solutions Qualifications • Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related field with 5+ years' experience in automotive/robotics/aerospace or similar • Demonstrated ability to work independently and deliver with minimal oversight • Strong hands-on experience with harness routing/retention and/or mechanical packaging in constrained vehicle environments • Proficiency with CAD (e.g., CATIA, NX, SolidWorks) and 2D drawings; comfortable driving designs through release/change control • Solid understanding of DFM/DFA, tolerance stack-ups, and manufacturing methods (sheet metal, machining, injection molded clips, additive prototyping) • Practical knowledge of harness integration best practices: bend radius, strain relief, branch management, clip spacing, chafe protection, heat avoidance, edge protection, grommet usage, service loops, installation sequencing • Comfortable working directly with hardware, vehicles, and technicians in fast iteration cycles • Strong communication and documentation skills Bonus Qualifications • Master's degree in Mechanical Engineering or Electrical Engineering • Experience with harness design tools (e.g., Siemens Capital, CATIA/3DX, NX) and release workflows (PLM, ECO/CR) • Familiarity with automotive networks and electrical integration constraints (CAN/LIN routing considerations, grounding, EMC-sensitive routing) • Experience defining fastener strategy and durability considerations (vibration, corrosion, thermal, ingress/IP needs) • Experience building or supporting test fixtures / special equipment for lab or vehicle work Salary Range • $110,000–120,000 • Actual salary dependent on experience, skills, and qualifications Compliance Notice Alten USA is a federal contractor and Equal Opportunity Employer. All candidates selected for employment must successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Senior Automotive Design Release Engineer responsible for end-to-end development and release of Overhead Systems components, leading CAD design, supplier coordination, APQP execution, DVP&R validation, tooling milestones, and engineering changes across vehicle programs. The role requires deep expertise in interior trim and lighting components, PLM management, DFMEA, and manufacturing feasibility from concept through production launch. Candidates will act as technical authority, driving quality, cost, and timing alignment with cross-functional teams and suppliers. 🗂️ Requirements: Bachelor’s degree in Mechanical Engineering, Automotive Engineering or related field, 8+ years of automotive product design and development experience in Interior Trim and/or Lighting Components, Direct DRE experience on Overhead Systems components, Expert proficiency in CATIA V5/V6 or NX/UG for 3D/2D design and GD&T, Expert-level experience with Teamcenter and eBOM/PBOM management, Strong knowledge of DFMEA and APQP processes, Experience managing tooling milestones T1/T2/T3 and PPAP/PSW submission, Hands-on experience with DVP&R planning and validation testing, Knowledge of automotive interior manufacturing processes (injection molding, compression molding, welding, foaming, thermoforming), Proficiency in root cause analysis tools (5-Why, KT, Red X), Fluent English, Proficiency in MS Office or Google G-Suite 📃 Skills: CATIA, NX, Teamcenter, GD&T, DFMEA, APQP, DVP&R, PPAP, PSW, PBOM, eBOM, CMM, InjectionMolding, CompressionMolding, Thermoforming, VacuumForming, PlasticWelding, 5-Why, RedX, KT, MSOffice 🏢 Description: Key Responsibilities & Tasks: Lead end-to-end design release of Overhead Systems components (Headliner, Sun Visor, Grab Handle, Overhead Console, Interior Lighting, Microphones, Cameras) across Client vehicle programs. Own and manage all technical data across Client systems: 3D/2D CAD releases, GD&T drawings, PBOM/eBOM, piece numbers, and engineering documentation throughout the full execution phase. Drive supplier engagement through all APQP gates: design reviews, DFMEA development, tooling feasibility, APQP deliverable tracking, timing management, and cost/quality alignment. Build, own, and actively manage DVP&R plans; coordinate and validate test execution for durability, environmental, thermal, NVH, abuse, and safety requirements; track open items and drive closure with suppliers. Lead and participate in DFMEA development with suppliers; ensure DFMEA sign-off aligns with tooling release gates per Client APQP requirements. Support prototype builds (Mule, VP, PPAP, Launch) to resolve fit, finish, function, and integration issues; attend in-plant build events at supplier and assembly facilities as required. Manage tooling milestone gates (T1/T2/T3); coordinate tooling release sign-off, dimensional approval, CMM reviews, and PPAP/PSW submission per Client APQP gate requirements. Apply formal root cause analysis tools (5-Why, KT, Red X) to diagnose and permanently resolve design, material, and manufacturing issues; lead corrective action with suppliers. Manage engineering changes end-to-end: initiate, evaluate, and close CNs/ECNs in Teamcenter; assess cost, weight, and timing impact; coordinate cross-functional approval. Define part breakup, assembly sequence, and master sections for the Program of Record (POR); develop source packages including PBOM, eBOM, tech sheets, and DVP&R. Perform packaging, manufacturing, and assembly feasibility studies for OHS components; evaluate DFM/DFMA compliance and drive design optimization with suppliers. Support In/Out/Explo decision-making using standard decision matrices (quality, cost, timing, performance); synthesize program requirements including financial targets, weight budgets, and complexity with theme styling. Maintain issue logbooks; present top open issues and risk status to management weekly; lead crossfunctional actions to closure. Conduct benchmarking studies as required; identify cost reduction and value optimization opportunities throughout the program lifecycle. Preferred Education: Bachelor's degree in Mechanical Engineering, Automotive Engineering, or related field. Preferred Experience Essential: 8+ years of Product Design & Development experience in automotive Interior Trim and/or Lighting Components, with direct DRE execution phase experience on Overhead Systems (Headliner, Sun Visor, Grab Handle, Overhead Console, Interior Lighting, Microphones, Cameras). Expert proficiency in CAD tools (CATIA V5/V6 or NX/UG) for 3D design release, 2D drawing creation, GD&T application, and master section development. Expert-level proficiency in PLM/PDM systems (Teamcenter); full ownership of eBOM/PBOM structure, piece number management, and CN/ECN processing throughout execution phase. Deep knowledge of DFM/DFMA principles and DFMEA development; proven ability to lead DFMEA sign-off with suppliers aligned to Client APQP gate requirements. In-depth knowledge of automotive interior component manufacturing processes (injection molding, compression molding, plastic welding, foaming, vacuum forming, thermoforming); experience managing tooling milestones (T1/T2/T3), dimensional approval, and CMM reviews through to PPAP/PSW. Demonstrated ownership of DVP&R plans: build, track, and close test execution for durability, environmental, thermal, NVH, abuse, and safety requirements; experience with PBOM/eBOM management and full technical documentation suite. Ability to interpret feasibility criteria for styling and engineering integration; proficiency with formal root cause analysis tools (5-Why, KT, Red X) to drive permanent corrective actions. Proven leadership in resolving complex cross-functional design issues; ability to mentor junior engineers and act as technical authority for OHS system on program. Strong communication and presentation skills; ability to lead design reviews, escalate risks to senior management, and align cross-functional teams including Styling, Safety, Manufacturing, Purchasing, and Quality. Ability to manage full supplier lifecycle: technical reviews, APQP gate tracking, DFMEA, DVP&R coordination, tooling release, PPAP/PSW, and in-plant support for prototype builds and program launch. Expert-level knowledge in manufacturing and assembly feasibility, with demonstrated experience driving DFM optimization from concept through production ramp. Language Requirements: Essential: English Knowledge in UG/NX & Team center. Knowledge in MS-Office or Google G-Suite. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Seeking an Exterior Lighting Design & Release Engineer to lead the development of automotive lighting systems from concept through production. The role involves cross-functional collaboration, supplier management, root-cause analysis, and ensuring compliance with performance, manufacturing, and regulatory requirements. Candidates should have strong experience in automotive lamp development, CATIA, and lighting system engineering. 🗂️ Requirements: Bachelor's degree in Mechanical Engineering or related discipline, 5+ years of exterior/interior lamp development experience at a Tier 1 or OEM, Experience with automotive lighting systems engineering and CAN traces, Ability to manage full part lifecycle from design through production release, Proficiency in CATIA V5/V6, Knowledge of plastics, injection molding, optical design, GD&T, and tolerance stack-up analysis, Experience with DFMEA development, Knowledge of FMVSS, ECE, NCAP, and automotive regulatory standards, Experience managing supplier relationships and engineering change management, Ability to perform root-cause analysis for lighting system faults 📃 Skills: CATIA, Enovia, CAN, GD&T, DFMEA, FMVSS, ECE, NCAP, BOM, InjectionMolding, Optics, Plastics 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.Location: Foster City, CA We're seeking an experienced Exterior Lighting Design & Release Engineer to lead the design and development of advanced automotive lighting systems from concept through production. In this role, you'll collaborate closely with design, manufacturing, suppliers, and cross-functional engineering teams to transform creative styling concepts into high-quality, production-ready lighting solutions that meet performance, regulatory, cost, and timing objectives. The ideal candidate brings a strong background in automotive lamp development, expertise in optical and mechanical design, and a passion for solving complex engineering challenges while driving innovative products into production. Responsibilities • Design and develop exterior lighting solutions for various vehicles, translating aesthetic styling visions into feasible, production-ready designs from concept through production, ensuring performance, timing, and commercial requirements are achieved. • Collaborate and communicate technical concepts and requirements effectively with Studio Designers, Suppliers, Manufacturing, and other cross-functional teams to achieve design themes, attribute targets, and resolve complex engineering issues. • Leverage expertise in plastics, injection molding, optical design, GD&T principles, tolerance stack-up analysis, and electronics to solve complex technical problems and evaluate design trade-offs using first-principles reasoning and root-cause analysis, ensuring all parts and assemblies are optimized for high-volume manufacturing. • Conduct high level root-cause analysis for any lighting system faults. Investigate system-level failures, often involving reviewing communication logs (CAN traces), module diagnostics, and correlating them with the functional model to find the source of the issue. • Understand lighting system architecture • Lead the development and creations of DFMEAs ensuring that dependencies are effectively cascaded to relevant cross-functional partners. • Support product validation plans, validation activities and sign off results. • Manage Tier 1 supplier relationships including RFQ documentation, technical design reviews, and the integration of supplier feedback. • Manage engineering change management, maintain accurate Bill of Materials (BOM) using Enovia, and generate and manage 3D and 2D data with Catia V6. • Align engineering deliverables with commercial program requirements including appearance, cost, weight, durability, legal requirements, and program timing objectives. Qualifications • Bachelors of Science in Mechanical Engineering (Or related discipline, Masters degree preferred) • 5+ years (preferred) of Exterior/interior Lamp development at a Tier 1 or OEM • Experience in Lighting systems Engineering: communication logs (CAN traces). • Capable of managing the full part lifecycle, including design, engineering validation, and release to production systems. • Proficient in CATIA V5/V6, utilizing key modules like Part Design and Geometric Surface Design to generate 3D geometry, sectional data, and communicate technically sound design solutions. • Strong understanding of engineering first principles and the ability to apply them to identify, analyze, and resolve technical challenges. • Demonstrated ability to manage information, prioritize tasks, and communicate project status with clarity. • Excellent communication and presentation skills, with the ability to clearly and concisely communicate with both technical and non-technical audiences. • Strong working knowledge of FMVSS, ECE, NCAP and other automotive evaluation and regulatory achievement • Ability to self-direct while managing ambiguity. • Curiosity and high learning agility. Salary Range • $115,000-130,000 • The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Systems Engineer role focused on defining system architecture, integration strategies, and validation processes for large-scale battery energy storage systems. The position involves cross-functional collaboration to ensure reliable, safe, and manufacturable subsystem integration while optimizing performance and resolving complex system-level issues. 🗂️ Requirements: Bachelor's or Master's degree in Engineering, 3+ years of professional engineering experience, Knowledge of systems engineering principles, Experience with requirements management, Experience with interface definition, Experience with lifecycle development, Experience in multidisciplinary integration, Knowledge of power electronics, battery systems, or electro-mechanical hardware, Proficiency with electrical battery systems, Experience with technical modeling and documentation tools, Strong written and verbal communication skills 📃 Skills: MATLAB, Simulink, SysML, Battery, Systems, Electronics, Firmware, Architecture, Testing, Integration, Validation 🏢 Description: We are looking for a Systems Engineer to join our team and bridge the gap between complex subsystem designs and high-level product architecture. You will be responsible for defining the technical requirements, interfaces, and integration strategies that ensure our large-scale energy storage systems operate reliably and safely. This role requires a holistic mindset, strong collaboration across multidisciplinary teams (mechanical, electrical, controls, and manufacturing), and a drive to solve tough technical challenges in service of our clean energy mission. Responsibilities • Define and manage system-level requirements, functional specifications, and interface control documents for core battery system architecture. • Collaborate with electrical, mechanical, and firmware engineering teams to ensure subsystem designs are seamlessly integrated and meet performance targets. • Lead system-level validation and integration testing, developing test plans that verify safety, reliability, and functionality under diverse operating conditions. • Perform trade-off analyses to optimize system performance, cost, and manufacturability, identifying potential risks early in the development lifecycle. • Conduct root cause analysis for complex system-level failures, working cross-functionally to implement effective engineering solutions. • Decompose requirements and functions from system-level down to component-level, ensuring traceability. Qualifications • Bachelor's or Master's degree in Engineering (Systems, Electrical, Mechanical, or equivalent) with 3+ years of professional experience. • Strong understanding of systems engineering principles, including requirements management, interface definition, and lifecycle development. • Experience in multidisciplinary integration, preferably in power electronics, battery systems, or large-scale electro-mechanical hardware. • Proficiency with electrical battery systems. • Proficiency with technical modeling and documentation tools (e.g., MATLAB/Simulink, SysML, or similar) to manage system architecture and performance data. • Excellent written and verbal communication skills, with the ability to bridge communication gaps between specialized engineering domains and non-technical stakeholders. Salary Range • $115,000-130,000 • The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Mechanical Engineer role focused on designing and analyzing rotating machinery components and subassemblies to meet customer and performance requirements. The position involves 3D CAD modeling, engineering analysis, GD&T application, design reviews, testing support, and collaboration across design, manufacturing, and validation teams. Candidates must have experience in mechanical design within product development environments and be eligible to access export-controlled information. 🗂️ Requirements: U.S. Person status (U.S. citizen, U.S. national, or lawful permanent resident), Bachelor’s degree in Mechanical Engineering or related discipline, Minimum 4 years of mechanical design experience in product development and manufacturing, Experience designing rotating machinery (motors, generators, or similar systems), Proficiency in creating and interpreting engineering drawings with GD&T, Ability to develop 3D CAD models and 2D drawings, Experience performing tolerance analysis and mechanical calculations, Availability for occasional domestic and international travel, Ability to complete pre-employment drug screening 📃 Skills: CAD, GD&T, CATIA, RotorDynamics, DO-160, ARP4754A, ARP4761, MicrosoftOffice, ToleranceAnalysis, BearingDesign 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.This position requires access to export-controlled information. Applicants must be U.S. Persons, which includes U.S. citizens, U.S. nationals, lawful permanent residents (Green Card holders). Position Responsibilities Engineer mechanical components and subassemblies for rotating machinery to satisfy customer specifications and targeted performance objectives, working under the guidance of a lead engineer Create detailed 3D CAD models and 2D engineering drawings, and perform supporting analyses such as tolerance accumulation, bearing load calculations, and preload assessments Ensure designs comply with company requirements and applicable industry standards, including GD&T and design-for-manufacturability principles Serve as a technical contributor in design, manufacturing, and test reviews by evaluating designs, identifying risks, and recommending corrective actions Execute assigned tasks in alignment with approved budgets and project schedules Review customer requirements and contribute to technical proposals, cost estimates, test plans, process qualification documents, bills of materials, schedules, and engineering reports as needed Proactively identify and resolve technical issues affecting current products or new development efforts Maintain clear, timely communication with peers and leadership regarding technical progress, challenges, and potential risks Assist with testing and validation activities for both new and existing products, with oversight from senior engineering staff Follow established safety practices and actively support continuous improvement of health, safety, and environmental initiatives Support occasional domestic and international travel (typically once per quarter) Be available for extended or off-hour work during peak project phases when required Education and Experience Bachelor's degree in Mechanical Engineering or a closely related discipline Minimum of four (4) years of experience in mechanical design within a product development and manufacturing environment Technical Skills and Competencies Hands-on experience designing rotating machinery such as motors, generators, or similar systems Ability to create and interpret engineering drawings and specifications, including proper application of GD&T Sound engineering judgment across multiple mechanical disciplines Strong analytical and problem-solving capabilities Effective interpersonal and collaboration skills for working with cross-functional teams and customers Well-developed organizational, documentation, and reporting skills Proficiency in developing 3D CAD models and 2D drawings Working knowledge of Microsoft Office tools Familiarity with common shop and inspection tools, including measurement equipment Preferred Qualifications Experience designing bearing systems and wound components Knowledge of rotor dynamics principles Familiarity with oil and air cooling approaches for rotating equipment Exposure to aerospace standards such as DO-160, ARP4754A, and ARP4761 Experience using CATIA Salary Range:$85,000-100,000 The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Mechanical Design Engineer role focused on designing and developing rotating machinery components and subassemblies within a product development and manufacturing environment. The position involves 3D CAD modeling, engineering analysis, compliance with industry standards, and participation in design, manufacturing, and test reviews. Candidates will support testing, resolve technical issues, and contribute to technical documentation while working under a lead engineer. 🗂️ Requirements: Bachelor's degree in Mechanical Engineering or related discipline, Minimum 4 years of mechanical design experience in product development and manufacturing, Experience designing rotating machinery (motors, generators, or similar systems), Proficiency in creating 3D CAD models and 2D engineering drawings, Strong knowledge and application of GD&T, Ability to perform tolerance analysis and bearing load calculations, Knowledge of rotor dynamics principles, Experience with bearing systems and wound components design, Familiarity with aerospace standards (DO-160, ARP4754A, ARP4761), U.S. Person status (U.S. citizen, U.S. national, or lawful permanent resident), Willingness to travel occasionally and work extended hours when required 📃 Skills: CATIA, CAD, GD&T, DO-160, ARP4754A, ARP4761, RotorDynamics, MicrosoftOffice, ToleranceAnalysis, BearingCalculations 🏢 Description: This position requires access to export-controlled information. Applicants must be U.S. Persons, which includes U.S. citizens, U.S. nationals, lawful permanent residents (Green Card holders). Position Responsibilities Engineer mechanical components and subassemblies for rotating machinery to satisfy customer specifications and targeted performance objectives, working under the guidance of a lead engineer Create detailed 3D CAD models and 2D engineering drawings, and perform supporting analyses such as tolerance accumulation, bearing load calculations, and preload assessments Ensure designs comply with company requirements and applicable industry standards, including GD&T and design-for-manufacturability principles Serve as a technical contributor in design, manufacturing, and test reviews by evaluating designs, identifying risks, and recommending corrective actions Execute assigned tasks in alignment with approved budgets and project schedules Review customer requirements and contribute to technical proposals, cost estimates, test plans, process qualification documents, bills of materials, schedules, and engineering reports as needed Proactively identify and resolve technical issues affecting current products or new development efforts Maintain clear, timely communication with peers and leadership regarding technical progress, challenges, and potential risks Assist with testing and validation activities for both new and existing products, with oversight from senior engineering staff Follow established safety practices and actively support continuous improvement of health, safety, and environmental initiatives Support occasional domestic and international travel (typically once per quarter) Be available for extended or off-hour work during peak project phases when required Education and Experience Bachelor's degree in Mechanical Engineering or a closely related discipline Minimum of four (4) years of experience in mechanical design within a product development and manufacturing environment Technical Skills and Competencies Hands-on experience designing rotating machinery such as motors, generators, or similar systems Ability to create and interpret engineering drawings and specifications, including proper application of GD&T Sound engineering judgment across multiple mechanical disciplines Strong analytical and problem-solving capabilities Effective interpersonal and collaboration skills for working with cross-functional teams and customers Well-developed organizational, documentation, and reporting skills Proficiency in developing 3D CAD models and 2D drawings Working knowledge of Microsoft Office tools Familiarity with common shop and inspection tools, including measurement equipment Exposure to aerospace standards such as DO-160, ARP4754A, and ARP4761 Experience designing bearing systems and wound components Knowledge of rotor dynamics principles Familiarity with oil and air cooling approaches for rotating equipment Experience using CATIA Salary Range: $85,000–90,000 The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience.

🏢 Summary: Engineering role focused on design release and lifecycle management of vehicle access systems including passive entry, keyless entry, and smartphone-as-a-key technologies. The position involves managing ECU hardware/software requirements, coordinating with suppliers and cross-functional teams, and supporting production launches, validation, and field issue resolution across multiple vehicle programs. 🗂️ Requirements: Bachelor's Degree in Communication Engineering, Bachelor's Degree in Electrical Engineering or Electronics Engineering, 6 months experience, US citizenship or permanent residency, Ability to travel weekly to client location 📃 Skills: ECU, NFC, Palantir, GIMS, PPAP, ATAR, BoM, Calibration, RF, Hardware, Software 🏢 Description: Lead design release activities for passive entry, keyless entry, keyless go, proximity approach, and smartphone-as-a-key vehicle functions in a fast paced product development environment. Own and manage component- and system-level requirements for the radio frequency hub module, key fob, and digital key control module across multiple vehicle programs. Release and maintain Change Notices (CN) and Bills of Materials (BoM) for part design updates and production changes. Collaborate with suppliers, validation, purchasing, and plant teams to ensure timely delivery and high quality ECU hardware and software. Release design components such as key fobs and NFC cards to meet design studio requirements, including ATAR and PPAP approvals. Manage calibration releases and related activities for key fob and phone based vehicle access systems. Support plant build issues and field triage activities, driving resolution through the GIMS system. Conduct warranty claim reviews in Palantir to identify failure trends and lead service actions and software releases as needed. Present component status, CN justifications, and issue resolution plans to cross functional teams and leadership. Manage launch readiness with suppliers, ensuring components meet program timing and compliance requirements. The position will require travel to client location weekly. Requirements: - Bachelor's Degree in Communication Engineering, Electrical Engineering or Electronics Engineering - Six (6) months experience - US Persons (citizens or permanent residents) only 40 hr/wk, $105,872 yr. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. Drug Screening Requirement: All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Engineering role focused on automotive interior seat systems, responsible for design, development, validation, and release of components using advanced quality and performance methodologies. The position involves cross-functional leadership, supplier management, and feasibility analysis for injection molded and decorative parts. Candidates will apply DFSS principles, CAD tools, and validation methods to deliver high-quality interior products. 🗂️ Requirements: Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Computer Engineering or MBA from ABET accredited university, Experience in automotive interior product design and seat systems development, Knowledge of performance standards, master sections and surface feasibility proposals, Design for Six Sigma (DFSS) experience (Green or Black Belt preferred), Knowledge of DFMEA and DVP&R, Experience with tooling feasibility for injection molded plastics and decorative components, Proficiency in NX and Teamcenter, Understanding of FEA, Mold Flow validation and GD&T, Strong technical knowledge of plastic and metal component design and system interfaces, Experience leading suppliers and cross-functional engineering teams, Ability to manage multiple complex projects simultaneously, Willingness to travel to suppliers and assembly plants (including Canada and Mexico), Strong MS Office skills 📃 Skills: NX, Teamcenter, DFSS, Shainin, DFMEA, DVP&R, FEA, Moldflow, GD&T, i-Speed, MSOffice 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.Job Summary: The Seating Heat & Ventilation Design Release Engineer (DRE) is responsible for the end-to-end design, development, validation, and launch of heated and ventilated seat systems across Client vehicle programs. This role owns the technical definition, release, and ongoing quality performance of the seat thermal comfort features, working closely with cross-functional teams and external suppliers to deliver best-in-class customer comfort, quality, and value. Key Responsibilities: Own the design and release of seat heating and ventilation components and systems (heatermats, blowers, plenums, foam interfaces, harnesses, etc.) from concept through production. Develop and maintain component and system-level technical specifications, design documents, and engineering standards for heated and ventilated seating. Lead packaging and integration of heat and ventilation systems into seat complete/structures and foam, ensuring compliance with ergonomics, safety, comfort, manufacturability, and serviceability requirements. Create and maintain engineering documentation in Client systems (e.g., part numbers, BOMs, drawings, 3D dataetc). Coordinate with suppliers on design proposals, DFMEAs, DVP&Rs, timing plans, and cost/feasibility studies; drive robust design solutions that meet Client performance targets. Plan and execute validation activities for seat heat & ventilation systems, including thermal performance testing, durability, environmental, and regulatory compliance. Analyze test data, identify root cause of issues, and drive corrective actions and design changes to closure. Support vehicle builds (mules, pilots, PPAP, launch) by resolving fit, finish, function, and electrical/thermal performance issues in a timely manner. Collaborate with Electrical, HVAC, HMI, Body, and Vehicle Integration teams to ensure seamless system operation, proper network communication (LIN/CAN), and robust control strategies. Manage engineering changes (CNs/ECNs), cost reductions, and quality improvements for in-production programs. Support functional safety, compliance, and regulatory requirements as applicable (thermal safety, occupant comfort and health, electrical safety, etc.). Track and report program status, risks, and open issues to management and program teams; maintain clear and organized openissue lists. Benchmark competitive seat comfort technologies and contribute to Client seating innovation roadmaps for thermal comfort and wellbeing. Qualifications & Skills: Demonstrated leadership skills, ability to work autonomously, excellent communication skills, positive attitude, willingness to learn, flexibility, team-player, and attention to detail. Bachelor's Degree in Mechatronics Engineering, Electrical Engineering, or Mechanical Engineering from an ABET-accredited university. 5+ years of engineering experience in the automotive industry. Hands-on experience with heated/ventilated/cooled seat systems, including interaction with foam, trim, HVAC, Modules and seat structures. Working knowledge of engineering fundamentals in thermodynamics, heat transfer, fluid flow, and/or HVAC integration. Prior experience in a Design Release Engineer (DRE) or System Responsible Engineer role at an OEM or Tier 1 supplier Proficiency with 3D CAD tools (CATIA, NX, or equivalent) for packaging and design review (detailed design experience is a plus). Experience with standard engineering tools and processes: DFMEA, DVP&R, root cause analysis, design reviews, and problem-solving methodologies. Experience with global project management and leading cross-functional teams. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.