Mechanical Engineer II

🏢 Summary: Mechanical Design Engineer role focused on designing and developing rotating machinery components and subassemblies within a product development and manufacturing environment. The position involves 3D CAD modeling, engineering analysis, compliance with industry standards, and participation in design, manufacturing, and test reviews. Candidates will support testing, resolve technical issues, and contribute to technical documentation while working under a lead engineer. 🗂️ Requirements: Bachelor's degree in Mechanical Engineering or related discipline, Minimum 4 years of mechanical design experience in product development and manufacturing, Experience designing rotating machinery (motors, generators, or similar systems), Proficiency in creating 3D CAD models and 2D engineering drawings, Strong knowledge and application of GD&T, Ability to perform tolerance analysis and bearing load calculations, Knowledge of rotor dynamics principles, Experience with bearing systems and wound components design, Familiarity with aerospace standards (DO-160, ARP4754A, ARP4761), U.S. Person status (U.S. citizen, U.S. national, or lawful permanent resident), Willingness to travel occasionally and work extended hours when required 📃 Skills: CATIA, CAD, GD&T, DO-160, ARP4754A, ARP4761, RotorDynamics, MicrosoftOffice, ToleranceAnalysis, BearingCalculations 🏢 Description: This position requires access to export-controlled information. Applicants must be U.S. Persons, which includes U.S. citizens, U.S. nationals, lawful permanent residents (Green Card holders). Position Responsibilities Engineer mechanical components and subassemblies for rotating machinery to satisfy customer specifications and targeted performance objectives, working under the guidance of a lead engineer Create detailed 3D CAD models and 2D engineering drawings, and perform supporting analyses such as tolerance accumulation, bearing load calculations, and preload assessments Ensure designs comply with company requirements and applicable industry standards, including GD&T and design-for-manufacturability principles Serve as a technical contributor in design, manufacturing, and test reviews by evaluating designs, identifying risks, and recommending corrective actions Execute assigned tasks in alignment with approved budgets and project schedules Review customer requirements and contribute to technical proposals, cost estimates, test plans, process qualification documents, bills of materials, schedules, and engineering reports as needed Proactively identify and resolve technical issues affecting current products or new development efforts Maintain clear, timely communication with peers and leadership regarding technical progress, challenges, and potential risks Assist with testing and validation activities for both new and existing products, with oversight from senior engineering staff Follow established safety practices and actively support continuous improvement of health, safety, and environmental initiatives Support occasional domestic and international travel (typically once per quarter) Be available for extended or off-hour work during peak project phases when required Education and Experience Bachelor's degree in Mechanical Engineering or a closely related discipline Minimum of four (4) years of experience in mechanical design within a product development and manufacturing environment Technical Skills and Competencies Hands-on experience designing rotating machinery such as motors, generators, or similar systems Ability to create and interpret engineering drawings and specifications, including proper application of GD&T Sound engineering judgment across multiple mechanical disciplines Strong analytical and problem-solving capabilities Effective interpersonal and collaboration skills for working with cross-functional teams and customers Well-developed organizational, documentation, and reporting skills Proficiency in developing 3D CAD models and 2D drawings Working knowledge of Microsoft Office tools Familiarity with common shop and inspection tools, including measurement equipment Exposure to aerospace standards such as DO-160, ARP4754A, and ARP4761 Experience designing bearing systems and wound components Knowledge of rotor dynamics principles Familiarity with oil and air cooling approaches for rotating equipment Experience using CATIA Salary Range: $85,000–90,000 The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience.

🏢 Summary: R&D Mechanical Engineer role focused on designing and developing mechanical components and systems through the full product development lifecycle, from concept and prototyping to testing and production support. The position involves cross-functional collaboration, CAD modeling, engineering analysis, and prototype testing in an on-site engineering environment. 🗂️ Requirements: Bachelor's degree in Mechanical Engineering or related discipline, 4–8 years of mechanical engineering experience, Experience in product development or R&D environment, Proficiency with CAD software, Experience designing mechanical systems, assemblies, and components for production, Understanding of mechanics, materials, thermodynamics, and manufacturing processes, Experience developing and testing prototypes, Ability to work on-site daily in Bartlesville, OK 📃 Skills: SolidWorks, Creo, CATIA, Autodesk, CAD, Mechanical, Manufacturing, Thermodynamics, Prototyping 🏢 Description: As an R&D Mechanical Engineer you will be responsible for: - Design and develop mechanical components, assemblies, and systems to meet product performance, reliability, cost, and manufacturability requirements. - Create detailed 3D models, engineering drawings, and technical documentation using CAD software. - Lead and support product development activities from concept generation through prototype development, testing, and product launch. - Develop and execute engineering test plans, analyze results, and provide recommendations for design improvements. - Conduct feasibility studies, design analyses, and failure investigations. - Collaborate with cross-functional teams including electrical engineering, manufacturing, quality, supply chain, regulatory, and product management. - Support design reviews, risk assessments, and engineering change processes. - Maintain project schedules and provide regular status updates to stakeholders. Qualifications: - Bachelor's degree in Mechanical Engineering or related engineering discipline. - 4–8 years of mechanical engineering experience in a product development or R&D environment. - Proficiency with CAD software such as SolidWorks, Creo, CATIA, or Autodesk Inventor. - Experience designing mechanical systems, assemblies, and components for production. - Strong understanding of engineering fundamentals, including mechanics, materials, thermodynamics, and manufacturing processes. - Experience developing and testing prototypes. Location: On-site daily in Bartlesville, OK Salary Range: $100K-$140K The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. Alten USA is an Equal Opportunity Employer and considers all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Mechanical Engineer role responsible for designing, analyzing, and prototyping complex mechanical and electromechanical systems from concept through production in an industrial environment. The position involves solid modeling, engineering analysis, documentation control, and cross-functional collaboration to support new product development and existing equipment. Candidates will lead or contribute to projects involving pumps, motors, and fabricated components while ensuring design validation and compliance with DFM/DFA standards. 🗂️ Requirements: Bachelor’s degree in Mechanical Engineering or related discipline, 3+ years of mechanical engineering experience in industrial, manufacturing, or heavy equipment environment, Proven experience leading design projects from concept through production, Advanced proficiency in solid modeling (Solid Edge preferred), Experience designing complex mechanical parts and assemblies, Experience designing and prototyping electromechanical systems, Knowledge of pumps, motors, and fabricated component processes, Experience with FEA and FMEA analytical methods, Ability to create and maintain technical documentation, BOMs, and change histories, Strong mathematical and technical analysis skills, Proficiency with Microsoft Office and engineering analysis tools, Ability to travel occasionally (0–10%) 📃 Skills: Solid Edge, CAD, FEA, FMEA, DFM, DFA, BOM, Microsoft Office 🏢 Description: As a Mechanical Engineer you will be responsible for: Mechanical Design: Design parts, assemblies, and sheet metal components to bring products from concept to prototype, testing, and launch using product specifications and standard DFM/DFA methodologies. Engineering Analysis: Evaluate or generate technical specifications, reliability, and costing of various equipment including pumps, motors, levers, lights, hardware, and assorted integrated electrical components. Prototyping: Plan and coordinate production of prototype parts and systems for validation. Documentation: Fully document and track engineering changes, CAD files, and test reports in cooperation with production and drafting personnel. Cross-Functional Collaboration: Provide engineering support to Production and Service to resolve issues on existing equipment. Work closely with other engineers and departments to bring new solutions to market. Project Leadership: Take ownership of small to large projects with complex assemblies and features. Qualifications: Education: Bachelor's degree in Mechanical Engineering or a related engineering discipline. Experience: 3+ years of progressive mechanical engineering experience in an industrial, manufacturing, or heavy equipment environment. Proven experience leading design projects from concept through production. Functional / Technical Knowledge, Skills & Abilities: Advanced proficiency in solid modeling techniques and programs (Solid Edge preferred). Understanding of pumps, motors, and fabricated component processes, including component specification and mounting solutions. Proven experience in mechanical design of complex parts, assemblies, and products. Experience designing and prototyping electromechanical systems. Extensive knowledge of common analytical methods including FEA and FMEA. Strong mathematical skills and ability to work with technical instructions, diagrams, and equations. Dedication to thorough tracking of design files, solid models, BOMs, and change histories. Ability to write professional, technical, and end-user documentation. Occasional travel (0-10%) to area customers, suppliers, or equipment sites if needed. Strong computer skills including Microsoft Office and engineering analysis tools. Salary Range: $93k-$123k Drug Screening Requirement: As a federal contractor, employment is contingent upon successful completion of a pre-employment drug screening.

🏢 Summary: Mechanical Engineer II role focused on designing and developing precision opto-mechanical systems, including stabilization mechanisms and ruggedized assemblies. The position involves cross-functional collaboration, prototype testing, tolerance analysis, and integration of optical components in demanding engineering environments. 🗂️ Requirements: Bachelor's degree in Mechanical Engineering or related field, 3–10 years of mechanical design experience, Experience with precision mechanical design, Experience with tight tolerance assemblies, Proficiency in CAD tools, Strong understanding of GD&T, Experience with tolerance stack-up analysis, Experience in cross-functional engineering environments 📃 Skills: SolidWorks, CAD, GD&T, Mechanical, Optical, Tolerance, Actuation, Gimbals, Validation, Testing 🏢 Description: As a Mechanical Engineer II you will be responsible for: - Design and develop precision mechanical components and assemblies for opto-mechanical systems - Support integration of optical elements including lenses, mirrors, and laser paths into mechanical structures - Develop and refine pointing and stabilization mechanisms (e.g., gimbals, mounts, precision actuation systems) - Perform tolerance analysis (GD&T) to ensure optical alignment and system performance - Collaborate cross-functionally with optical, electrical, and systems engineering teams - Support prototype builds, testing, and validation, including troubleshooting and design iteration - Ensure designs meet ruggedization requirements (shock, vibration, thermal stability) Qualifications: - Bachelor's degree in Mechanical Engineering or related field - 3–10 years of experience in mechanical design (level flexible based on candidate) - Experience with precision mechanical design and tight tolerance assemblies in rugged environments - Proficiency in CAD tools (SolidWorks preferred) - Strong understanding of GD&T and tolerance stack-up analysis - Experience working in cross-functional engineering environments Salary Range: $100k-$140k All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Mechanical Engineer II role focused on designing, developing, and validating mechanical hardware for power conversion systems, electronic control units, and advanced electronic products. The position involves full product lifecycle support including CAD design, testing, manufacturing support, and cross-functional collaboration in aerospace and safety-critical environments. Candidates will contribute to product development, qualification, and continuous improvement activities while supporting engineering schedules and technical documentation. 🗂️ Requirements: Bachelor's degree in Mechanical Engineering or related discipline, 3+ years of mechanical product design experience, Experience with 3D CAD software, Experience creating and interpreting engineering drawings, Knowledge of GD&T, Experience with CATIA, Understanding of DFM and mechanical design principles, Ability to support testing, qualification, and production transition, Proficiency with Microsoft Office, Experience with mechanical measuring instruments and shop tools 📃 Skills: CATIA, CAD, GD&T, DFM, Microsoft, DO-160, ARP4754A, ARP4761 🏢 Description: Position Summary We are seeking a Mechanical Engineer II to support the design, development, and validation of mechanical hardware used in power conversion systems, electronic control units, and other advanced electronic products. In this role, you will contribute throughout the product lifecycle, from initial concept and proposal development through product testing, manufacturing support, and continuous improvement. The ideal candidate has experience designing mechanical components for electronic assemblies and enjoys working in a collaborative engineering environment. Key Responsibilities - Develop mechanical designs for electronic enclosures, mounting systems, and structural components that satisfy customer specifications, performance goals, and manufacturing requirements. - Create and maintain detailed 3D CAD models and production drawings while applying engineering principles such as tolerance analysis and dimensional control. - Design products in accordance with applicable engineering standards, including GD&T, design for manufacturability (DFM), and company design practices. - Participate in design reviews and cross-functional engineering meetings, providing technical feedback to improve product performance, manufacturability, quality, and reliability. - Support engineering programs by completing assigned work within established project schedules and budget expectations. - Review technical documentation and customer requirements while contributing to engineering estimates, design documentation, bills of materials, validation plans, qualification procedures, and technical reports. - Investigate engineering challenges associated with existing products and new developments, recommending practical solutions to technical issues. - Provide regular project updates to engineering leadership, identifying potential risks and recommending mitigation strategies when appropriate. - Assist with product verification activities, prototype evaluations, and engineering testing for both new and existing designs. - Promote a safe working environment by following established health, safety, and environmental policies and supporting continuous improvement initiatives. - Travel occasionally within the United States and internationally (typically one to two trips annually) as project needs require. - Support project schedules that may occasionally require overtime or evening work during critical development phases. Required Qualifications - Bachelor's degree in Mechanical Engineering or a related engineering discipline. - Minimum of three years of experience in mechanical product design within a manufacturing or new product development environment. Required Skills - Strong understanding of mechanical engineering fundamentals and product design practices. - Experience creating and interpreting engineering drawings, including the application of GD&T. - Proficiency using 3D CAD software to develop components, assemblies, and manufacturing drawings. - Ability to apply sound engineering judgment and analytical thinking to technical challenges. - Effective problem-solving and troubleshooting abilities. - Strong communication and interpersonal skills with the ability to collaborate across engineering, manufacturing, and customer teams. - Well-organized with the ability to manage multiple priorities and maintain accurate technical documentation. - Proficient with Microsoft Office applications. - Experience using standard mechanical measuring instruments and basic shop tools. - Experience using CATIA for mechanical design. - Background designing hardware for aerospace or other safety-critical applications. - Familiarity with aerospace development and certification standards, including RTCA/DO-160, ARP4754A, and ARP4761. - Experience supporting products through testing, qualification, and transition into production. Salary Range $80,000-100,000 The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Mechanical Engineer II role focused on finite element analysis of mechanical and electromechanical components across industries such as aerospace, robotics, medical, and defense. The position involves structural and dynamic analysis, design reviews, project coordination, and cross-functional engineering collaboration. Candidates will support product development, customer requirements, and technical documentation in an onsite engineering environment. 🗂️ Requirements: Bachelor's degree in engineering with 4+ years of engineering analysis and product development experience or Master's degree with 2+ years of experience, Strong knowledge of FEA using Femap and NX Nastran, Experience with structural and dynamic analysis of mechanical components, Knowledge of CAD software, Knowledge of Microsoft Office tools, Ability to solve complex engineering problems independently, Strong verbal and written communication skills, Ability to manage multiple projects effectively, US citizenship or permanent residency required 📃 Skills: FEA, Femap, Nastran, SolidWorks, CAD, Word, Excel, PowerPoint, Outlook 🏢 Description: As Mechanical Engineer II you will be responsible for: - Analyze mechanical and electromechanical components and assemblies using finite element analysis (FEA) for static structural, and dynamic loads with minimal guidance. - Familiar with both solid and shell meshing analysis approaches. - Collect, develop, and analyze design inputs. - Generate hand calculations to support design decisions. - May work under a senior engineer on larger projects. - Apply experience, critical thinking, and expertise leading or participating in design reviews. - Estimate scope and duration of proposed analysis projects. - Provide inputs to project planning, budgeting, scheduling, and tracking. - Communicate with vendors, team, and PM for the advancement of projects. - Assist in the sales process for quoting and estimating future design and analysis projects. - Identify design and product risks and mitigations. - Adhere to Quality System processes. - Compile and present complete engineering design and analysis documentation so product designs can be produced while meeting the proper regulatory requirements. - Communicate and coordinate with other disciplines including Mechanical Design Engineering, Electrical Engineering, Systems Engineering, and Software Engineering. - Willingness to work on projects across a wide range of industries (defense, space, aviation, robotics, medical). - Willing to act as embedded support for a customer for short durations. When it occurs, this work can typically be done remotely. - May serve as primary technical resource on a project. - May complete technical reviews of team member work. - Interact with customer to derive requirements and communicate technical direction. - Work with Project Management and Systems Engineering to understand system-level requirements and identify scope creep. - Support Product Development Process. Qualifications: - Bachelor's degree (B.S.) in engineering from an accredited college or university plus 4+ years of engineering analysis and product development experience or Master's Degree (M.S.) in engineering from an accredited college or university plus 2+ years of engineering analysis and product development experience. - Strong knowledge of FEA, specifically using Femap with NX Nastran for structural and dynamic analysis of mechanical components. - Knowledge of CAD packages (preferably SolidWorks) and Microsoft Office (Word, Excel, PowerPoint, and Outlook). - Excellent verbal and written communication skills to present and report technical findings. - Demonstrated ability to solve complex problems using engineering principles without supervision. - Ability to interpret instructions furnished in written, oral, diagram, or schedule form. - Ability to share and manage time among multiple projects effectively. Desired Skills: - Experience with drone equipment or analysis of composite structures. Salary Range: $100,000 - $120,000 The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. Equal Opportunity Employer. Drug Screening Requirement: Candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Systems Engineer role focused on defining system architecture, integration strategies, and validation processes for large-scale battery energy storage systems. The position involves cross-functional collaboration to ensure reliable, safe, and manufacturable subsystem integration while optimizing performance and resolving complex system-level issues. 🗂️ Requirements: Bachelor's or Master's degree in Engineering, 3+ years of professional engineering experience, Knowledge of systems engineering principles, Experience with requirements management, Experience with interface definition, Experience with lifecycle development, Experience in multidisciplinary integration, Knowledge of power electronics, battery systems, or electro-mechanical hardware, Proficiency with electrical battery systems, Experience with technical modeling and documentation tools, Strong written and verbal communication skills 📃 Skills: MATLAB, Simulink, SysML, Battery, Systems, Electronics, Firmware, Architecture, Testing, Integration, Validation 🏢 Description: We are looking for a Systems Engineer to join our team and bridge the gap between complex subsystem designs and high-level product architecture. You will be responsible for defining the technical requirements, interfaces, and integration strategies that ensure our large-scale energy storage systems operate reliably and safely. This role requires a holistic mindset, strong collaboration across multidisciplinary teams (mechanical, electrical, controls, and manufacturing), and a drive to solve tough technical challenges in service of our clean energy mission. Responsibilities • Define and manage system-level requirements, functional specifications, and interface control documents for core battery system architecture. • Collaborate with electrical, mechanical, and firmware engineering teams to ensure subsystem designs are seamlessly integrated and meet performance targets. • Lead system-level validation and integration testing, developing test plans that verify safety, reliability, and functionality under diverse operating conditions. • Perform trade-off analyses to optimize system performance, cost, and manufacturability, identifying potential risks early in the development lifecycle. • Conduct root cause analysis for complex system-level failures, working cross-functionally to implement effective engineering solutions. • Decompose requirements and functions from system-level down to component-level, ensuring traceability. Qualifications • Bachelor's or Master's degree in Engineering (Systems, Electrical, Mechanical, or equivalent) with 3+ years of professional experience. • Strong understanding of systems engineering principles, including requirements management, interface definition, and lifecycle development. • Experience in multidisciplinary integration, preferably in power electronics, battery systems, or large-scale electro-mechanical hardware. • Proficiency with electrical battery systems. • Proficiency with technical modeling and documentation tools (e.g., MATLAB/Simulink, SysML, or similar) to manage system architecture and performance data. • Excellent written and verbal communication skills, with the ability to bridge communication gaps between specialized engineering domains and non-technical stakeholders. Salary Range • $115,000-130,000 • The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Electrical engineering role focused on designing and developing embedded hardware systems and PCBs for industries including medical devices, aerospace, UAVs, and industrial controls. The position involves end-to-end electronics design, debugging, verification, and collaboration within multidisciplinary engineering teams. Hybrid role in Westminster, CO with opportunities to support customer-facing project scoping and design reviews. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or Computer Engineering, 3+ years of electrical engineering experience, Experience with embedded systems design and PCB layout, Knowledge of microcontrollers, processors, or FPGAs, Experience with high-speed or RF design technologies, Experience with communication interfaces, Knowledge of DC/DC converters and power topologies, Experience with EMI/EMC and signal integrity analysis, Experience with analog and sensor interface design, Hands-on PCB troubleshooting and debug experience, Eligibility to work as a US Person (citizen or permanent resident) 📃 Skills: FPGA, PCB, Embedded, Microcontrollers, Processors, SerDes, PCIe, I2C, SPI, UART, RS-232, RS-485, USB, SDIO, CAN, MIL-STD-1553, LVDS, DC/DC, EMI, EMC, Oscilloscopes, LogicAnalyzers, SpectrumAnalyzers, RF, 802.11, 10GbE 🏢 Description: Summary: As a member of the electrical team, you will work in multi-disciplinary project teams to architect and develop systems for markets including consumer products, medical devices, space systems, unmanned aerial vehicles, and industrial controls. You will collaborate with senior electrical engineers and other disciplines to deliver electronics designs and products from concept through verification. How You Will Spend Your Time: Design Work - Design hardware architectures, power budgets, electrical block diagrams, schematics, and PCBs - Own designs from start to finish including layout, bring-up, debug, documentation, and verification - Participate in regular design reviews - Occasionally travel to customer sites for project kickoffs or deliveries Sales Support - Support account managers and project managers in bidding and scoping projects - Visit customer sites to discuss technical capabilities when needed Who You Are: - Able to quickly learn new skills and technologies - Comfortable owning designs through the complete lifecycle - Strong attention to detail and adaptability - Effective collaborator within multidisciplinary teams Minimum Qualifications: - Design and layout experience including several of the following: - Microcontrollers, processors, and FPGAs in embedded systems - Controlled impedance for high-speed channel design or RF technologies (10GbE, 802.11, SerDes, PCIe) - Communication interfaces including I2C, SPI, UART, RS-232, RS-485, USB, SDIO, CAN, MIL-STD-1553, and LVDS - DC/DC converters and power topologies - EMI/EMC and signal integrity analysis - Analog and sensor interface design - Lab troubleshooting and debug experience of PCB assemblies using oscilloscopes, logic analyzers, network analyzers, spectrum analyzers, and related equipment Education and Experience: - Bachelor's degree in Electrical Engineering or Computer Engineering from an accredited university - 3+ years of experience Location: Hybrid in Westminster, CO Salary Range: $90K - $140K The actual salary offered depends on job-related knowledge, qualifications, skills, education, training, and experience. Note: - Due to the nature of the work, only US Persons (citizens or permanent residents) may apply - Pre-employment drug screening required as a condition of hire - Equal opportunity employer

🏢 Summary: Hybrid Harness / Mechanical Integration Engineer role focused on low-voltage electrical system integration in vehicles, combining harness routing, mechanical packaging, and hands-on prototype support. The position involves end-to-end ownership of routing strategies, mechanical retention design, CAD documentation, and build validation in real vehicle environments. Ideal for an independent engineer experienced in constrained vehicle integration and fast iteration cycles. 🗂️ Requirements: Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related field, 5+ years of experience in automotive, robotics, aerospace, or similar industries, Strong experience with harness routing and mechanical packaging in constrained vehicle environments, Proficiency in CAD tools and creation of 2D drawings, Experience driving designs through release and change control processes, Understanding of DFM/DFA and tolerance stack-ups, Knowledge of manufacturing methods: sheet metal, machining, injection molding, additive prototyping, Practical knowledge of harness integration best practices (bend radius, strain relief, chafe protection, heat avoidance), Ability to independently own integration problems and deliver manufacturable solutions, Experience supporting prototype builds and working directly with hardware and technicians 📃 Skills: CAD, CATIA, NX, SolidWorks, GD&T, DFM, DFA, PLM, ECO, CAN, LIN, EMC, SiemensCapital, 3DX 🏢 Description: Location: Foster City, CA We're looking for a highly self-sufficient engineer who can operate as a hybrid Harness / Mechanical Integration Engineer to enable fast, safe, and serviceable implementation of low-voltage electrical systems in vehicles. This role bridges harness routing/retention and mechanical packaging, focusing on practical solutions such as brackets, clips, clamps, channels, strain relief, and protective features to ensure electrical components and harnesses can be installed reliably in real vehicles. The ideal candidate can independently take loosely defined integration problems, drive the design to a manufacturable solution, and support prototype builds with minimal guidance. Responsibilities • Own end-to-end harness mechanical integration for assigned vehicle areas: define routing/retention strategy, identify constraints, and drive implementation through release and build support • Independently design and iterate mechanical retention solutions for harnesses and LV components (brackets, clamps, clips, tie features, channels, grommet interfaces, protective covers, strain relief) with clear installation intent • Lead packaging and routing studies in-vehicle: measure, model, manage clearances, avoid chafe/heat/sharp edges, ensure service access, and account for build variation and tolerance stack-ups • Create complete CAD and release-ready documentation: ○ 3D CAD + 2D drawings for brackets/mounts/retainers (GD&T as needed) ○ Harness routing/retention definition and installation guidance sufficient for technicians and build teams ○ BOMs, fastener specs, torque requirements, and assembly steps • Coordinate and support prototype builds / fit-checks: drive fast design loops to closure based on real vehicle feedback • Proactively identify integration risks (rattles, loosening, chafe, interference, thermal proximity, ingress, accessibility) and implement prevention strategies • Partner with EE, Vehicle System Integration, Vehicle Integration, Geometric Integration and Manufacturing to deliver stable, serviceable solutions Qualifications • Bachelor's degree in Mechanical Engineering, Electrical Engineering, or related field with 5+ years' experience in automotive/robotics/aerospace or similar • Demonstrated ability to work independently and deliver with minimal oversight • Strong hands-on experience with harness routing/retention and/or mechanical packaging in constrained vehicle environments • Proficiency with CAD (e.g., CATIA, NX, SolidWorks) and 2D drawings; comfortable driving designs through release/change control • Solid understanding of DFM/DFA, tolerance stack-ups, and manufacturing methods (sheet metal, machining, injection molded clips, additive prototyping) • Practical knowledge of harness integration best practices: bend radius, strain relief, branch management, clip spacing, chafe protection, heat avoidance, edge protection, grommet usage, service loops, installation sequencing • Comfortable working directly with hardware, vehicles, and technicians in fast iteration cycles • Strong communication and documentation skills Bonus Qualifications • Master's degree in Mechanical Engineering or Electrical Engineering • Experience with harness design tools (e.g., Siemens Capital, CATIA/3DX, NX) and release workflows (PLM, ECO/CR) • Familiarity with automotive networks and electrical integration constraints (CAN/LIN routing considerations, grounding, EMC-sensitive routing) • Experience defining fastener strategy and durability considerations (vibration, corrosion, thermal, ingress/IP needs) • Experience building or supporting test fixtures / special equipment for lab or vehicle work Salary Range • $110,000–120,000 • Actual salary dependent on experience, skills, and qualifications Compliance Notice Alten USA is a federal contractor and Equal Opportunity Employer. All candidates selected for employment must successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Electrical Engineer role focused on planning, designing, installing, and maintaining plant electrical infrastructure and facility systems while improving energy efficiency and managing engineering projects. The position involves supporting industrial equipment, troubleshooting complex systems, and coordinating construction and maintenance activities. Candidates will work on multiple projects within plant operations and infrastructure environments. 🗂️ Requirements: BS in Electrical Engineering or Electrical Engineering Technology, Minimum 5 years of Plant or Facility Engineering experience, Experience with plant electrical infrastructure and facility systems, Knowledge of National Electric Code (NFPA) and NFPA 70E, Ability to interpret technical drawings and prints, Experience managing engineering projects, Proficiency in AutoCAD, Proficiency in Microsoft Office, Ability to work in industrial environments 📃 Skills: AutoCAD, Microsoft, Excel, Word, PowerPoint, NFPA, NFPA70E, HVAC, Boilers, Compressors, Chillers, UPS, Ethernet, Fiber, ElectricalDistribution, 15kV, 480V, 120V 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.Job Description: Perform engineering duties of planning, designing, installing, and maintenance of electrical systems for the plant facility & operations areas. Improve the energy efficiency of operating infrastructure & manufacturing equipment to reduce the overall energy costs. Manage and coordinate small and large engineering projects. Job Functions: Estimate, plan, design, and implement the construction and maintenance of plant infrastructure. Specify equipment and systems to support plant infrastructure and facility processes. Troubleshoot and solve problems related to the plant infrastructure and facility processes. Support plant infrastructure and facility process equipment which includes, but is not limited to: boilers, compressors, chillers, HVAC systems, electrical distribution systems (15kV, 480V, 120V), standby generator & UPS systems, fiber optic & Ethernet communication systems, Life Safety systems (smoke & fire detection, annunciation & notification, fire suppression), security systems (card access, camera, gate control), lighting. Plan & coordinate work with skilled in-house tradesman & supervisors, as well as outside contractors & service technicians. Provide and implement designs for electrical infrastructure equipment and systems. Working knowledge & practical use of National Electric Code (NFPA) & NFPA 70E Standard for Electrical Safety in the Workplace. Participate in teams and cross-functional groups. Work on multiple projects simultaneously with minimal supervision. Project management and plant engineering functions. Candidate Requirements: BS degree in Electrical Engineering or Electrical Engineering Technology (or equivalent), and at least five years Plant Engineering or Facility Engineering experience. Computer Skills: Microsoft Office (Word, Excel, PowerPoint), AutoCAD. Effective oral and written communication skills. High level of interpersonal skills to work effectively with others. High level of analytical ability to solve complex problems. Ability to interpret prints and drawings. Understanding of building, infrastructure, and utility functions. Ability to work in an industrial work environment ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.