Automation Engineer

🏢 Summary: Automation Engineer role focused on designing, programming, and supporting PLC, HMI, and SCADA systems within industrial process control projects. The position involves interpreting engineering documentation, managing project scope and budgets, and providing on-site and remote automation support. This role requires experience with major automation platforms and industrial networking, with periodic travel for testing and client support. 🗂️ Requirements: US Person (citizen or permanent resident), Experience with PLC, HMI, and SCADA programming, Experience with major automation platforms (Rockwell, Schneider, Emerson, Siemens), Understanding of industrial networking (redundant and distributed networks), Knowledge of VFDs, instrumentation, and process control equipment, Experience with electrical design and control documentation, Ability to interpret P&IDs, electrical schematics, I/O lists, and network architecture, Experience troubleshooting control systems and industrial networks, Ability to travel up to 25% 📃 Skills: PLC, HMI, SCADA, Rockwell, Schneider, Emerson, Siemens, VFD, IPC, Networking, P&ID, Electrical, Instrumentation 🏢 Description: As an Automation Engineer you will be responsible for: ● Read, interpret, and comment on engineering documents, including Controls, P&IDs, GAs, process design guidelines, Electrical Schematics, I/O Lists, Instrument and Automated Valve Lists, Network Architecture. ● Collaborate in cross-functional project team discussions and client meetings. ● Understand, comment, and follow contractual and customer specifications. ● Design the complete detailed programming deliverables, including PLC, HMI, SCADA and related scope. ● Manage budget, scope, schedule, and proactively report risks and opportunities to project teams. ● Lead the maintenance and upkeep of one set of Veolia process control documents. ● Support field and production activities, providing Automation support both remotely and on site. ● Ability to collaborate in and lead cross-functional project team discussions and client meetings. ● Proven ability to develop and follow procedures and standards, while extrapolating new concepts from established standards. ● Knowledge of and/or demonstrated ability to learn equipment and processes related to Veolia WTS products and systems. ● Experience with the major brands of automation equipment; Rockwell, Schneider, Emerson, Siemens. ● Demonstrated experience with troubleshooting control systems, network design, VFD's, IPC's and an appetite to learn new software. Qualifications: ● Knowledge of and/or demonstrated ability to learn equipment and processes related to Veolia WTS products and systems. ● Understanding of networking including redundant and distributed networks. ● Understanding of VFD's, instrumentation and other process control related equipment. ● Strong focus on customer relationships (external/internal). ● Experience with basic electrical design and control documentation. Periodic travel (25%) for factory testing, panel checkouts, client meetings, customer site visits, and/or visits to other Veolia offices. Salary Range: $90-$140k Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Automation Engineer role focused on designing, programming, and supporting PLC, HMI, and SCADA systems within industrial process control projects. The position involves interpreting engineering documentation, managing project scope and budget, troubleshooting control systems, and collaborating with cross-functional teams and clients. Includes field support, networking, and automation hardware integration with up to 25% travel. 🗂️ Requirements: US Person (citizen or permanent resident), Experience with PLC, HMI, and SCADA programming, Experience with major automation brands (Rockwell, Schneider, Emerson, Siemens), Understanding of networking including redundant and distributed networks, Knowledge of VFDs, instrumentation, and process control equipment, Experience with electrical design and control documentation, Ability to read and interpret engineering documents (P&ID, electrical schematics, I/O lists), Willingness to travel up to 25% 📃 Skills: PLC, HMI, SCADA, Rockwell, Schneider, Emerson, Siemens, Networking, VFD, Instrumentation, Electrical, P&ID, SCADA, IPC 🏢 Description: As an Automation Engineer you will be responsible for: ● Read, interpret, and comment on engineering documents, including Controls, P&IDs, GAs, process design guidelines, Electrical Schematics, I/O Lists, Instrument and Automated Valve Lists, Network Architecture. ● Collaborate in cross-functional project team discussions and client meetings. ● Understand, comment, and follow contractual and customer specifications. ● Design the complete detailed programming deliverables, including PLC, HMI, SCADA and related scope. ● Manage budget, scope, schedule, and proactively report risks and opportunities to project teams. ● Lead the maintenance and upkeep of one set of Veolia process control documents. ● Support field and production activities, providing Automation support both remotely and on site. ● Ability to collaborate in and lead cross-functional project team discussions and client meetings. ● Proven ability to develop and follow procedures and standards, while extrapolating new concepts from established standards. ● Knowledge of and/or demonstrated ability to learn equipment and processes related to Veolia WTS products and systems. ● Experience with the major brands of automation equipment; Rockwell, Schneider, Emerson, Siemens ● Demonstrated experience with troubleshooting control systems, network design, VFD's, IPC's and an appetite to learn new software. Qualifications: ● Knowledge of and/or demonstrated ability to learn equipment and processes related to Veolia WTS products and systems. ● Understanding of networking including redundant and distributed networks ● Understanding of VFD's, instrumentation and other process control related equipment. ● Strong focus on customer relationships (external/internal). Understands balance between customer and Veolia teams. ● Experience with basic electrical design and control documentation. Periodic travel (25%) for factory testing, panel checkouts, client meetings, customer site visits, and/or visits to other Veolia offices Salary Range: $90-$140k Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Automation Engineer responsible for designing, programming, and supporting PLC, HMI, and SCADA systems within industrial process control projects. The role involves interpreting engineering documentation, collaborating with cross-functional teams, managing project scope and schedule, and providing field support. Requires experience with major automation platforms and networking in distributed control environments. 🗂️ Requirements: Ability to read and interpret engineering documents (P&IDs, electrical schematics, I/O lists, network architecture), Experience designing and programming PLC, HMI, and SCADA systems, Understanding of networking including redundant and distributed networks, Understanding of VFDs, instrumentation, and process control equipment, Experience with major automation platforms (Rockwell, Schneider, Emerson, Siemens), Experience troubleshooting control systems and network design, Experience with basic electrical design and control documentation, Ability to travel up to 25%, US citizenship or permanent residency 📃 Skills: PLC, HMI, SCADA, Rockwell, Schneider, Emerson, Siemens, Networking, VFD, Instrumentation, P&ID, Electrical, I/O, IPC 🏢 Description: As an Automation Engineer you will be responsible for: • Read, interpret, and comment on engineering documents, including Controls, P&IDs, GAs, process design guidelines, Electrical Schematics, I/O Lists, Instrument and Automated Valve Lists, Network Architecture. • Collaborate in cross-functional project team discussions and client meetings. • Understand, comment, and follow contractual and customer specifications. • Design the complete detailed programming deliverables, including PLC, HMI, SCADA and related scope. • Manage budget, scope, schedule, and proactively report risks and opportunities to project teams. • Lead the maintenance and upkeep of one set of Veolia process control documents. • Support field and production activities, providing Automation support both remotely and on site. • Ability to collaborate in and lead cross-functional project team discussions and client meetings. • Proven ability to develop and follow procedures and standards, while extrapolating new concepts from established standards. • Knowledge of and/or demonstrated ability to learn equipment and processes related to Veolia WTS products and systems. • Experience with the major brands of automation equipment; Rockwell, Schneider, Emerson, Siemens • Demonstrated experience with troubleshooting control systems, network design, VFD's, IPC's and an appetite to learn new software. Qualifications: • Knowledge of and/or demonstrated ability to learn equipment and processes related to Veolia WTS products and systems. • Understanding of networking including redundant and distributed networks • Understanding of VFD's, instrumentation and other process control related equipment. • Strong focus on customer relationships (external/internal). Understands balance between customer and Veolia teams. • Experience with basic electrical design and control documentation. Periodic travel (25%) for factory testing, panel checkouts, client meetings, customer site visits, and/or visits to other Veolia offices Salary Range: $90-$140k Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Automation & Controls Engineer role focused on developing advanced robotic manufacturing and industrial automation systems for next-generation factory modules. The position involves PLC, HMI, and SCADA development, controls architecture, commissioning, and collaboration with cross-functional engineering teams in a fast-paced R&D and production environment. 🗂️ Requirements: 5+ years industrial automation controls experience, IEC 61131-3 Structured Text programming, Ability to access US export-controlled information, Experience with PLC, HMI, and SCADA systems, Experience with industrial automation hardware and motion control, Experience with industrial networking, Experience with electrical control panel design, Experience with industrial safety systems and risk assessments, Experience with SCADA and factory data platforms, Technical leadership experience 📃 Skills: PLC, HMI, SCADA, IEC61131-3, StructuredText, Beckhoff, TwinCAT, NEC, NFPA79, UL508A, EPlan, AutoCAD, Fieldbus, MotionControl, Networking, FSoE, PROFIsafe, SCADA, Databases, Dashboards, Robotics, Git, SOLID, UnitTesting 🏢 Description: Purpose The Automation & Controls Engineer will support the development of flexible robotic manufacturing systems, core to the Divergent Adaptive Production System (DAPS). The ideal candidate has a track record of successfully architecting and deploying advanced automated systems in a quick changing, start-up environment. This role will take a hands-on execution approach and use their hardware and software skills to create bleeding-edge industrial automation systems, support production operations, and democratize factory data to support key business decisions. The Role - Develop PLC, HMI & SCADA software & controls architectures for the next generation of DAPS factories & factory modules. - Contribute to automation standards, frameworks, best practices, and platform selection. - Architect new advanced automation systems, ultimately leading to detailed design, development, and commissioning of first article factory modules. - Develop controls systems for new and experimental processes in an R&D environment. - Understand and steer production operations requirements for factory modules leading to increased overall factory OPE through better development of modules and factory data. - Work closely with cross-functional technical teams to ensure that program deliverables and milestones are defined, scheduled, and executed on time and budget. - Support engineering teams in achieving resolution of any gridlock and drive hands-on execution under intense time constraints. Basic Qualifications - Ability to lawfully access information and technology that is subject to US export controls. - 5 years of industrial automation controls experience in dynamic environments. - IEC 61131-3 Structured Text programming experience. Preferred Qualifications - Strong knowledge of NEC, NFPA 79, UL508A standards. - Experience designing electrical control panels using EPlan or AutoCAD. - Advanced experience working with the Beckhoff TwinCAT & hardware ecosystem. - Advanced experience with industrial automation hardware, fieldbus interfaces and motion control. - Advanced industrial networking experience. - Experience with industrial safety systems, risk assessments and safety over fieldbus protocols including FSoE and PROFIsafe. - Experience developing SCADA and factory data management platforms, industrial databases, dashboards. - Experience with industrial robot platforms, offline programming, and virtual commissioning. - Experience with industrial electrical schematic tools such as EPlan or AutoCAD Electrical. - Experience with software engineering practices, object-oriented programming, SOLID principles, unit testing, and development tools such as Git. - Technical leadership experience in defining standards, methods, processes, and training. Work Environment - Office and factory environment. - 100% onsite. - Minimal travel. - Work near moving mechanical parts. Compensation - Engineer II / E04: $111,300 - $166,960 - Senior / E05: $128,520 - $192,780 What We Offer - Competitive salary, equity plan, and discretionary bonus opportunities. - Paid vacation, sick time, company holidays, and year-end shutdown. - Paid parental leave. - Comprehensive health and wellness benefits including HMO and PPO options. - Company-sponsored life insurance and disability coverage. - Learning and development reimbursement opportunities. - Collaborative and high-performing work environment. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to protected characteristics. E-Verify The company participates in E-Verify to confirm employment eligibility in the United States. Los Angeles Fair Chance Initiative for Hiring Ordinance Qualified applicants with arrest and conviction records will be considered for employment.

🏢 Summary: Electrical Engineer role focused on designing and developing electrical systems for car wash equipment, including PLC-based controls, motor drives, sensors, and industrial automation components. The position involves electrical design, testing, troubleshooting, manufacturing support, and compliance with industry standards in an onsite industrial engineering environment. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related discipline, 3+ years of experience in industrial, automation, or heavy equipment electrical engineering, Knowledge of industrial electrical systems, Experience with PLCs, HMIs, VFDs, sensors, motors, and industrial communication protocols, Ability to create and maintain electrical schematics and wiring diagrams, Familiarity with NEC, UL 508, UL73, and electrical safety standards, Hands-on troubleshooting of electrical and control systems, Proficiency with engineering documentation tools and Microsoft Office, Experience with electrical CAD software, Ability to translate technical requirements into manufacturing instructions 📃 Skills: PLC, HMI, VFD, CAD, NEC, UL508, UL73, Motors, Sensors, Actuators, Relays, PowerSupplies, Grounding, Automation, MicrosoftOffice 🏢 Description: As Electrical Engineer you will be responsible for: - Design and develop electrical schematics, wiring diagrams, and control panel layouts for car wash equipment, including PLC-based control systems, motor drives, sensors, and actuators. - Select and specify electrical components such as PLCs, HMIs, VFDs, relays, power supplies, motors, and safety devices. - Ensure electrical designs comply with applicable codes and standards (e.g., NEC, UL 508 and UL73, and relevant local or environmental regulations). - Collaborate with mechanical engineering to ensure proper integration of electrical and mechanical systems within equipment designs. - Support manufacturing by providing clear build documentation, troubleshooting electrical issues on the production floor, and assisting with first article builds. - Develop and execute electrical testing and validation plans, including functional testing, safety testing, and failure analysis. Qualifications: - Bachelor's degree in Electrical Engineering or a related engineering discipline. - 3+ years of experience in electrical engineering within industrial, automation, or heavy equipment manufacturing environments. Functional / Technical Knowledge, Skills & Abilities: - Strong knowledge of industrial electrical systems, including power distribution, control circuits, and grounding. - Experience with PLCs, HMIs, VFDs, sensors, motors, and industrial communication protocols. - Ability to read, create, and maintain electrical schematics and wiring diagrams. - Familiarity with applicable electrical codes, safety standards, and certification requirements. - Hands-on troubleshooting skills for electrical and control system issues. - Proficiency with engineering documentation tools and Microsoft Office; experience with electrical CAD software preferred. - Ability to translate technical requirements into clear, actionable instructions for manufacturing and service teams. Salary Range: $95,000 - $135,000 Location: Onsite in Arvada, CO The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. Drug Screening Requirement: All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Electrical Engineer role focused on designing and supporting industrial electrical systems for car wash equipment, including PLC-based controls, wiring, testing, and manufacturing support. The position involves collaboration with mechanical engineering and ensuring compliance with electrical codes and safety standards. Onsite role in Arvada, CO with salary range of $95,000–$135,000. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related discipline, 3+ years of electrical engineering experience in industrial, automation, or heavy equipment manufacturing, Knowledge of industrial electrical systems, Experience with PLCs, HMIs, VFDs, sensors, motors, and industrial communication protocols, Ability to create and maintain electrical schematics and wiring diagrams, Familiarity with electrical codes and safety standards, Hands-on troubleshooting skills for electrical and control systems, Proficiency with engineering documentation tools and Microsoft Office, Experience with electrical CAD software, Ability to translate technical requirements into manufacturing instructions 📃 Skills: PLC, HMI, VFD, CAD, Microsoft, NEC, UL508, UL73, Sensors, Motors, Actuators, Relays, Power, Grounding, Testing, Troubleshooting, Automation 🏢 Description: As Electrical Engineer you will be responsible for: - Design and develop electrical schematics, wiring diagrams, and control panel layouts for car wash equipment, including PLC-based control systems, motor drives, sensors, and actuators. - Select and specify electrical components such as PLCs, HMIs, VFDs, relays, power supplies, motors, and safety devices. - Ensure electrical designs comply with applicable codes and standards (e.g., NEC, UL 508 and UL73, CE (not applicable- only for EU products), and relevant local or environmental regulations). - Collaborate with mechanical engineering to ensure proper integration of electrical and mechanical systems within equipment designs. - Support manufacturing by providing clear build documentation, troubleshooting electrical issues on the production floor, and assisting with first article builds. - Develop and execute electrical testing and validation plans, including functional testing, safety testing, and failure analysis. Qualifications: - Bachelor's degree in Electrical Engineering or a related engineering discipline. - 3+ years of experience in electrical engineering within an industrial, automation, or heavy equipment manufacturing environments. Functional / Technical Knowledge, Skills & Abilities: - Strong knowledge of industrial electrical systems, including power distribution, control circuits, and grounding. - Experience with PLCs, HMIs, VFDs, sensors, motors, and industrial communication protocols. - Ability to read, create, and maintain electrical schematics and wiring diagrams. - Familiarity with applicable electrical codes, safety standards, and certification requirements. - Hands-on troubleshooting skills for electrical and control system issues. - Proficiency with engineering documentation tools and Microsoft Office; experience with electrical CAD software preferred. - Ability to translate technical requirements into clear, actionable instructions for manufacturing and service teams. Salary Range: $95,000 - $135,000 The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Long-term Automation Engineer role focused on building and maintaining automated test solutions in a modern tech environment, with partial onsite work in Gdynia. The position emphasizes Python-based automation, API and Big Data testing, and integration with CI/CD pipelines. Candidates will work with contemporary tools and frameworks to design scalable, high-quality test automation solutions. 🗂️ Requirements: Proficiency in Python for test automation, Experience with PyTest, Robot Framework or similar frameworks, Experience with Git and CI/CD tools, Knowledge of API testing, Experience in Big Data testing, Experience with Cosmos DB, Understanding of web technologies, Experience with browser automation tools, Ability to work onsite in Gdynia 1 day per week 📃 Skills: Python, PyTest, RobotFramework, Git, Jenkins, GitLab, Postman, Requests, CosmosDB, Fabric, HTML, CSS, JavaScript, Selenium, CI/CD, BigData 🏢 Description: Automation Engineer 📌 We are seeking a highly experienced Automation Engineer on behalf of our client a well-known and fast-growing technology company offering a stable, long-term project in a modern environment. 📍 Work mode: Gdynia - 1 day per week from the office • Proficiency in Python programming for test automation. • Experience with automation frameworks such as PyTest, Robot Framework, or similar. • Familiarity with version control systems (e.g., Git) and CI/CD tools (e.g., Jenkins, GitLab CI). • Knowledge of API testing and tools (e.g., Postman, Requests library). • Big Data Testing skills • Focus on PyTest, Cosmos DB Experience on Fabric will helpful • Understanding of web technologies (HTML, CSS, JavaScript) and browser automation tools (e.g., Selenium). Desired skills: • Hands on experience leveraging AI tools to assist with test preparation and the design of test automation scripts ✅ Benefits: Work with modern technologies and international teams Long-term and stable cooperation Professional growth opportunities 📩 If you’re interested and meet the qualifications, please send your CV to Alina Pchelnikova at alina.pchelnikova@dcvtechnologies.co.uk

🏢 Summary: The offer is for an experienced QA Automation Engineer responsible for designing, implementing, and maintaining automated test suites for capital market systems. The role involves frontend and backend test automation, integration and performance testing, and close collaboration with development teams in a hybrid work model. It provides stable employment, competitive salary, and professional growth opportunities. 🗂️ Requirements: Minimum 3 years of experience in functional test automation (frontend and backend), Minimum 3 years of experience in integration, acceptance, and performance testing, Strong knowledge of Cypress, Puppeteer, SoapUI, JMeter, Postman, Experience with GUI testing, REST, SOAP, Kafka, Proficiency in TypeScript and JavaScript, Understanding of Docker and WebSockets, Experience with GIT version control 📃 Skills: Cypress, Puppeteer, SoapUI, JMeter, Postman, REST, SOAP, Kafka, TypeScript, JavaScript, Docker, WebSockets, GIT, GUI, TCP, UDP, Linux 🏢 Description: QA Automation Engineer Location: Warsaw (Hybrid: 1–2 days a week in the office) Salary: 14,000 – 17,000 PLN Gross We are looking for an experienced QA Automation Engineer to join our team. In this role, you will play a key part in ensuring the quality of our capital market systems by designing, implementing, and maintaining automated test suites. Key Responsibilities Test Automation: Actively participate in the test automation process, creating and maintaining automated test scripts and tools. Test Design: Design and implement comprehensive test cases based on technical requirements. Bug Tracking: Identify, document, and report software defects in a clear and timely manner. Collaboration: Work closely with Developers, Architects, and fellow QA Engineers to ensure the highest software quality and find optimal solutions to technical issues. Specification & Analysis: Collaborate on preparing technical specifications and requirements in the testing domain. Documentation: Assist in creating and updating technical documentation for developed tools and test scripts within the transactional system. Requirements Experience: Minimum 3 years of hands-on experience in functional test automation (both frontend and backend). Testing Diversity: At least 3 years of experience in integration, acceptance, and performance testing. Tech Stack & Tools: Strong knowledge of testing tools and protocols: Cypress, Puppeteer, SoapUI, JMeter, Postman, as well as GUI testing, REST, SOAP, and Kafka. Programming Languages: Proficiency in TypeScript and JavaScript. DevOps & Tools: Solid understanding of Docker, WebSockets, and version control using GIT. Nice to Have Experience in testing software built on low-level programming languages. Knowledge of network protocols (UDP, TCP) and Linux environments. What We Offer Stability: Employment contract (Umowa o pracę). Growth: A challenging and rewarding role in the dynamic capital markets industry with clear professional development opportunities. Compensation: Attractive remuneration system matching your skills. Learning: Access to professional training, courses, and industry conferences. Benefits: A rich benefits package, including a cafeteria system, private medical care, life insurance, and PPE (Employee Pension Plan). Flexibility: Hybrid work model (1–2 days a week in our Warsaw office). This role is not perfectly suited for you, but you have a friend who would fit? Recommend your friend and get up to 5000 zł! Referral Program: Talent from your network

🏢 Summary: Mechanical Engineer role responsible for designing, analyzing, and prototyping complex mechanical and electromechanical systems from concept through production in an industrial environment. The position involves solid modeling, engineering analysis, documentation control, and cross-functional collaboration to support new product development and existing equipment. Candidates will lead or contribute to projects involving pumps, motors, and fabricated components while ensuring design validation and compliance with DFM/DFA standards. 🗂️ Requirements: Bachelor’s degree in Mechanical Engineering or related discipline, 3+ years of mechanical engineering experience in industrial, manufacturing, or heavy equipment environment, Proven experience leading design projects from concept through production, Advanced proficiency in solid modeling (Solid Edge preferred), Experience designing complex mechanical parts and assemblies, Experience designing and prototyping electromechanical systems, Knowledge of pumps, motors, and fabricated component processes, Experience with FEA and FMEA analytical methods, Ability to create and maintain technical documentation, BOMs, and change histories, Strong mathematical and technical analysis skills, Proficiency with Microsoft Office and engineering analysis tools, Ability to travel occasionally (0–10%) 📃 Skills: Solid Edge, CAD, FEA, FMEA, DFM, DFA, BOM, Microsoft Office 🏢 Description: As a Mechanical Engineer you will be responsible for: Mechanical Design: Design parts, assemblies, and sheet metal components to bring products from concept to prototype, testing, and launch using product specifications and standard DFM/DFA methodologies. Engineering Analysis: Evaluate or generate technical specifications, reliability, and costing of various equipment including pumps, motors, levers, lights, hardware, and assorted integrated electrical components. Prototyping: Plan and coordinate production of prototype parts and systems for validation. Documentation: Fully document and track engineering changes, CAD files, and test reports in cooperation with production and drafting personnel. Cross-Functional Collaboration: Provide engineering support to Production and Service to resolve issues on existing equipment. Work closely with other engineers and departments to bring new solutions to market. Project Leadership: Take ownership of small to large projects with complex assemblies and features. Qualifications: Education: Bachelor's degree in Mechanical Engineering or a related engineering discipline. Experience: 3+ years of progressive mechanical engineering experience in an industrial, manufacturing, or heavy equipment environment. Proven experience leading design projects from concept through production. Functional / Technical Knowledge, Skills & Abilities: Advanced proficiency in solid modeling techniques and programs (Solid Edge preferred). Understanding of pumps, motors, and fabricated component processes, including component specification and mounting solutions. Proven experience in mechanical design of complex parts, assemblies, and products. Experience designing and prototyping electromechanical systems. Extensive knowledge of common analytical methods including FEA and FMEA. Strong mathematical skills and ability to work with technical instructions, diagrams, and equations. Dedication to thorough tracking of design files, solid models, BOMs, and change histories. Ability to write professional, technical, and end-user documentation. Occasional travel (0-10%) to area customers, suppliers, or equipment sites if needed. Strong computer skills including Microsoft Office and engineering analysis tools. Salary Range: $93k-$123k Drug Screening Requirement: As a federal contractor, employment is contingent upon successful completion of a pre-employment drug screening.

🏢 Summary: Software Engineer role focused on embedded and controls software development for automated commercial equipment and multifunctional hardware systems. The position involves working with cross-functional engineering teams to develop, test, debug, and maintain low-level software using C and RTOS environments. This onsite role in Arvada, CO offers a salary range of $95,000–$150,000. 🗂️ Requirements: Bachelor's degree in Computer Science or Electrical Engineering, 6+ years of engineering experience, Strong C programming skills, Experience with Real Time Operating Systems, Deep understanding of microcontroller hardware, Extensive embedded programming experience, Ability to write technical and end-user documentation, Solid software design and debugging skills, Experience with RLL programming, GitHub utilization 📃 Skills: C, RTOS, Microcontrollers, Embedded, GitHub, RLL, CAN, Modbus, Serial, NEC, UL508A 🏢 Description: As Software Engineer you will be responsible for: - Collaborate closely with an international team of Software Engineers, as well as Mechanical, Electrical, and Design Engineers. - Analyze user requirements and control systems. - Analyze, define, and develop software test procedures. - Research, design, and write Controls software for automated commercial equipment. - Develop and/or modify existing programs by analyzing and identifying potential improvements. - Plan, architect, and execute additions to a comprehensive codebase for multi-functional hardware systems. - Create technical specifications and write user-facing operational documentation. - Provide technical support by responding to questions, making suggestions, and analyzing equipment. - Experience writing code to interface with machine hardware (I/O modules, motors, sensors, etc.) – nice to have - Familiarity with industrial communication protocols (serial, CAN, Modbus) - nice to have Qualifications: - Bachelor's degree in Computer Science or Electrical Engineering - 6+ years of engineering experience, or equivalent combination of education and experience - Strong C programming skills are a must - Experience with Real Time Operating Systems - Deep understanding of Microcontroller Hardware - Extensive knowledge of embedded programming down to the hardware level - Ability to write technical and end user documentation - Solid software design and debugging skills - RLL programming and GitHub utilization - Familiarity with National Electrical Code (NEC) and UL508A a plus Salary Range: $95,000 - $150,000 Location: Onsite in Arvada, CO The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. Drug Screening Requirement: All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.