Automation Engineer

🏢 Summary: Automation Engineer role focused on designing, programming, and supporting PLC, HMI, and SCADA systems within industrial process control projects. The position involves interpreting engineering documentation, managing project scope and budgets, and providing on-site and remote automation support. This role requires experience with major automation platforms and industrial networking, with periodic travel for testing and client support. 🗂️ Requirements: US Person (citizen or permanent resident), Experience with PLC, HMI, and SCADA programming, Experience with major automation platforms (Rockwell, Schneider, Emerson, Siemens), Understanding of industrial networking (redundant and distributed networks), Knowledge of VFDs, instrumentation, and process control equipment, Experience with electrical design and control documentation, Ability to interpret P&IDs, electrical schematics, I/O lists, and network architecture, Experience troubleshooting control systems and industrial networks, Ability to travel up to 25% 📃 Skills: PLC, HMI, SCADA, Rockwell, Schneider, Emerson, Siemens, VFD, IPC, Networking, P&ID, Electrical, Instrumentation 🏢 Description: As an Automation Engineer you will be responsible for: ● Read, interpret, and comment on engineering documents, including Controls, P&IDs, GAs, process design guidelines, Electrical Schematics, I/O Lists, Instrument and Automated Valve Lists, Network Architecture. ● Collaborate in cross-functional project team discussions and client meetings. ● Understand, comment, and follow contractual and customer specifications. ● Design the complete detailed programming deliverables, including PLC, HMI, SCADA and related scope. ● Manage budget, scope, schedule, and proactively report risks and opportunities to project teams. ● Lead the maintenance and upkeep of one set of Veolia process control documents. ● Support field and production activities, providing Automation support both remotely and on site. ● Ability to collaborate in and lead cross-functional project team discussions and client meetings. ● Proven ability to develop and follow procedures and standards, while extrapolating new concepts from established standards. ● Knowledge of and/or demonstrated ability to learn equipment and processes related to Veolia WTS products and systems. ● Experience with the major brands of automation equipment; Rockwell, Schneider, Emerson, Siemens. ● Demonstrated experience with troubleshooting control systems, network design, VFD's, IPC's and an appetite to learn new software. Qualifications: ● Knowledge of and/or demonstrated ability to learn equipment and processes related to Veolia WTS products and systems. ● Understanding of networking including redundant and distributed networks. ● Understanding of VFD's, instrumentation and other process control related equipment. ● Strong focus on customer relationships (external/internal). ● Experience with basic electrical design and control documentation. Periodic travel (25%) for factory testing, panel checkouts, client meetings, customer site visits, and/or visits to other Veolia offices. Salary Range: $90-$140k Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Automation Engineer responsible for designing, programming, and supporting PLC, HMI, and SCADA systems within industrial process control projects. The role involves interpreting engineering documentation, collaborating with cross-functional teams, managing project scope and schedule, and providing field support. Requires experience with major automation platforms and networking in distributed control environments. 🗂️ Requirements: Ability to read and interpret engineering documents (P&IDs, electrical schematics, I/O lists, network architecture), Experience designing and programming PLC, HMI, and SCADA systems, Understanding of networking including redundant and distributed networks, Understanding of VFDs, instrumentation, and process control equipment, Experience with major automation platforms (Rockwell, Schneider, Emerson, Siemens), Experience troubleshooting control systems and network design, Experience with basic electrical design and control documentation, Ability to travel up to 25%, US citizenship or permanent residency 📃 Skills: PLC, HMI, SCADA, Rockwell, Schneider, Emerson, Siemens, Networking, VFD, Instrumentation, P&ID, Electrical, I/O, IPC 🏢 Description: As an Automation Engineer you will be responsible for: • Read, interpret, and comment on engineering documents, including Controls, P&IDs, GAs, process design guidelines, Electrical Schematics, I/O Lists, Instrument and Automated Valve Lists, Network Architecture. • Collaborate in cross-functional project team discussions and client meetings. • Understand, comment, and follow contractual and customer specifications. • Design the complete detailed programming deliverables, including PLC, HMI, SCADA and related scope. • Manage budget, scope, schedule, and proactively report risks and opportunities to project teams. • Lead the maintenance and upkeep of one set of Veolia process control documents. • Support field and production activities, providing Automation support both remotely and on site. • Ability to collaborate in and lead cross-functional project team discussions and client meetings. • Proven ability to develop and follow procedures and standards, while extrapolating new concepts from established standards. • Knowledge of and/or demonstrated ability to learn equipment and processes related to Veolia WTS products and systems. • Experience with the major brands of automation equipment; Rockwell, Schneider, Emerson, Siemens • Demonstrated experience with troubleshooting control systems, network design, VFD's, IPC's and an appetite to learn new software. Qualifications: • Knowledge of and/or demonstrated ability to learn equipment and processes related to Veolia WTS products and systems. • Understanding of networking including redundant and distributed networks • Understanding of VFD's, instrumentation and other process control related equipment. • Strong focus on customer relationships (external/internal). Understands balance between customer and Veolia teams. • Experience with basic electrical design and control documentation. Periodic travel (25%) for factory testing, panel checkouts, client meetings, customer site visits, and/or visits to other Veolia offices Salary Range: $90-$140k Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: The role involves designing, programming, and supporting industrial automation systems, including PLC, HMI, and SCADA solutions, within cross-functional engineering projects. The engineer will interpret technical documentation, manage project scope and budgets, and provide field and remote support for process control systems. The position includes collaboration with clients and travel for testing and site activities. 🗂️ Requirements: US Person (citizen or permanent resident), Experience with PLC, HMI, and SCADA programming, Experience with major automation brands (Rockwell, Schneider, Emerson, Siemens), Understanding of industrial networking (redundant and distributed networks), Knowledge of VFDs, instrumentation, and process control equipment, Experience with electrical design and control documentation, Ability to read and interpret engineering documents (P&IDs, electrical schematics, I/O lists), Experience troubleshooting control systems and network design, Willingness to travel up to 25% 📃 Skills: PLC, HMI, SCADA, Rockwell, Schneider, Emerson, Siemens, Networking, VFD, Instrumentation, P&ID, Electrical, SCADA, IPC 🏢 Description: As an Automation Engineer you will be responsible for: ● Read, interpret, and comment on engineering documents, including Controls, P&IDs, GAs, process design guidelines, Electrical Schematics, I/O Lists, Instrument and Automated Valve Lists, Network Architecture. ● Collaborate in cross-functional project team discussions and client meetings. ● Understand, comment, and follow contractual and customer specifications. ● Design the complete detailed programming deliverables, including PLC, HMI, SCADA and related scope. ● Manage budget, scope, schedule, and proactively report risks and opportunities to project teams. ● Lead the maintenance and upkeep of one set of Veolia process control documents. ● Support field and production activities, providing Automation support both remotely and on site. ● Ability to collaborate in and lead cross-functional project team discussions and client meetings. ● Proven ability to develop and follow procedures and standards, while extrapolating new concepts from established standards. ● Knowledge of and/or demonstrated ability to learn equipment and processes related to Veolia WTS products and systems. ● Experience with the major brands of automation equipment; Rockwell, Schneider, Emerson, Siemens. ● Demonstrated experience with troubleshooting control systems, network design, VFD's, IPC's and an appetite to learn new software. Qualifications: ● Knowledge of and/or demonstrated ability to learn equipment and processes related to Veolia WTS products and systems. ● Understanding of networking including redundant and distributed networks. ● Understanding of VFD's, instrumentation and other process control related equipment. ● Strong focus on customer relationships (external/internal). ● Experience with basic electrical design and control documentation. Periodic travel (25%) for factory testing, panel checkouts, client meetings, customer site visits, and/or visits to other offices. Salary Range: $90-$140k Note: Due to the nature of the work, only US Persons (citizens or permanent residents) need apply for this position. Drug Screening Requirement: All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Electrical Engineer role focused on designing and supporting industrial electrical systems for car wash equipment, including PLC-based controls, wiring, testing, and manufacturing support. The position involves collaboration with mechanical engineering and ensuring compliance with electrical codes and safety standards. Onsite role in Arvada, CO with salary range of $95,000–$135,000. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related discipline, 3+ years of electrical engineering experience in industrial, automation, or heavy equipment manufacturing, Knowledge of industrial electrical systems, Experience with PLCs, HMIs, VFDs, sensors, motors, and industrial communication protocols, Ability to create and maintain electrical schematics and wiring diagrams, Familiarity with electrical codes and safety standards, Hands-on troubleshooting skills for electrical and control systems, Proficiency with engineering documentation tools and Microsoft Office, Experience with electrical CAD software, Ability to translate technical requirements into manufacturing instructions 📃 Skills: PLC, HMI, VFD, CAD, Microsoft, NEC, UL508, UL73, Sensors, Motors, Actuators, Relays, Power, Grounding, Testing, Troubleshooting, Automation 🏢 Description: As Electrical Engineer you will be responsible for: - Design and develop electrical schematics, wiring diagrams, and control panel layouts for car wash equipment, including PLC-based control systems, motor drives, sensors, and actuators. - Select and specify electrical components such as PLCs, HMIs, VFDs, relays, power supplies, motors, and safety devices. - Ensure electrical designs comply with applicable codes and standards (e.g., NEC, UL 508 and UL73, CE (not applicable- only for EU products), and relevant local or environmental regulations). - Collaborate with mechanical engineering to ensure proper integration of electrical and mechanical systems within equipment designs. - Support manufacturing by providing clear build documentation, troubleshooting electrical issues on the production floor, and assisting with first article builds. - Develop and execute electrical testing and validation plans, including functional testing, safety testing, and failure analysis. Qualifications: - Bachelor's degree in Electrical Engineering or a related engineering discipline. - 3+ years of experience in electrical engineering within an industrial, automation, or heavy equipment manufacturing environments. Functional / Technical Knowledge, Skills & Abilities: - Strong knowledge of industrial electrical systems, including power distribution, control circuits, and grounding. - Experience with PLCs, HMIs, VFDs, sensors, motors, and industrial communication protocols. - Ability to read, create, and maintain electrical schematics and wiring diagrams. - Familiarity with applicable electrical codes, safety standards, and certification requirements. - Hands-on troubleshooting skills for electrical and control system issues. - Proficiency with engineering documentation tools and Microsoft Office; experience with electrical CAD software preferred. - Ability to translate technical requirements into clear, actionable instructions for manufacturing and service teams. Salary Range: $95,000 - $135,000 The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Electrical Engineer role focused on designing and developing electrical systems for car wash equipment, including PLC-based controls, motor drives, sensors, and industrial automation components. The position involves electrical design, testing, troubleshooting, manufacturing support, and compliance with industry standards in an onsite industrial engineering environment. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related discipline, 3+ years of experience in industrial, automation, or heavy equipment electrical engineering, Knowledge of industrial electrical systems, Experience with PLCs, HMIs, VFDs, sensors, motors, and industrial communication protocols, Ability to create and maintain electrical schematics and wiring diagrams, Familiarity with NEC, UL 508, UL73, and electrical safety standards, Hands-on troubleshooting of electrical and control systems, Proficiency with engineering documentation tools and Microsoft Office, Experience with electrical CAD software, Ability to translate technical requirements into manufacturing instructions 📃 Skills: PLC, HMI, VFD, CAD, NEC, UL508, UL73, Motors, Sensors, Actuators, Relays, PowerSupplies, Grounding, Automation, MicrosoftOffice 🏢 Description: As Electrical Engineer you will be responsible for: - Design and develop electrical schematics, wiring diagrams, and control panel layouts for car wash equipment, including PLC-based control systems, motor drives, sensors, and actuators. - Select and specify electrical components such as PLCs, HMIs, VFDs, relays, power supplies, motors, and safety devices. - Ensure electrical designs comply with applicable codes and standards (e.g., NEC, UL 508 and UL73, and relevant local or environmental regulations). - Collaborate with mechanical engineering to ensure proper integration of electrical and mechanical systems within equipment designs. - Support manufacturing by providing clear build documentation, troubleshooting electrical issues on the production floor, and assisting with first article builds. - Develop and execute electrical testing and validation plans, including functional testing, safety testing, and failure analysis. Qualifications: - Bachelor's degree in Electrical Engineering or a related engineering discipline. - 3+ years of experience in electrical engineering within industrial, automation, or heavy equipment manufacturing environments. Functional / Technical Knowledge, Skills & Abilities: - Strong knowledge of industrial electrical systems, including power distribution, control circuits, and grounding. - Experience with PLCs, HMIs, VFDs, sensors, motors, and industrial communication protocols. - Ability to read, create, and maintain electrical schematics and wiring diagrams. - Familiarity with applicable electrical codes, safety standards, and certification requirements. - Hands-on troubleshooting skills for electrical and control system issues. - Proficiency with engineering documentation tools and Microsoft Office; experience with electrical CAD software preferred. - Ability to translate technical requirements into clear, actionable instructions for manufacturing and service teams. Salary Range: $95,000 - $135,000 Location: Onsite in Arvada, CO The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. Drug Screening Requirement: All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Software Engineer role focused on embedded and controls software development for automated commercial equipment and multifunctional hardware systems. The position involves working with cross-functional engineering teams to develop, test, debug, and maintain low-level software using C and RTOS environments. This onsite role in Arvada, CO offers a salary range of $95,000–$150,000. 🗂️ Requirements: Bachelor's degree in Computer Science or Electrical Engineering, 6+ years of engineering experience, Strong C programming skills, Experience with Real Time Operating Systems, Deep understanding of microcontroller hardware, Extensive embedded programming experience, Ability to write technical and end-user documentation, Solid software design and debugging skills, Experience with RLL programming, GitHub utilization 📃 Skills: C, RTOS, Microcontrollers, Embedded, GitHub, RLL, CAN, Modbus, Serial, NEC, UL508A 🏢 Description: As Software Engineer you will be responsible for: - Collaborate closely with an international team of Software Engineers, as well as Mechanical, Electrical, and Design Engineers. - Analyze user requirements and control systems. - Analyze, define, and develop software test procedures. - Research, design, and write Controls software for automated commercial equipment. - Develop and/or modify existing programs by analyzing and identifying potential improvements. - Plan, architect, and execute additions to a comprehensive codebase for multi-functional hardware systems. - Create technical specifications and write user-facing operational documentation. - Provide technical support by responding to questions, making suggestions, and analyzing equipment. - Experience writing code to interface with machine hardware (I/O modules, motors, sensors, etc.) – nice to have - Familiarity with industrial communication protocols (serial, CAN, Modbus) - nice to have Qualifications: - Bachelor's degree in Computer Science or Electrical Engineering - 6+ years of engineering experience, or equivalent combination of education and experience - Strong C programming skills are a must - Experience with Real Time Operating Systems - Deep understanding of Microcontroller Hardware - Extensive knowledge of embedded programming down to the hardware level - Ability to write technical and end user documentation - Solid software design and debugging skills - RLL programming and GitHub utilization - Familiarity with National Electrical Code (NEC) and UL508A a plus Salary Range: $95,000 - $150,000 Location: Onsite in Arvada, CO The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. Drug Screening Requirement: All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Software Development Engineer role focused on automation and operational excellence, including CI/CD pipeline development, testing automation, and improving system reliability. The position involves streamlining engineering operations, automating workflows, and implementing scalable solutions in cloud environments. 🗂️ Requirements: 5+ years of software engineering experience, Experience with CI/CD tools, Experience with integration testing and automation frameworks, Proficiency in Python or Java, Understanding of AWS, GCP, or Azure, Experience using AI tools for developer productivity 📃 Skills: Python, Java, Jenkins, GitHub, GitLab, AWS, GCP, Azure, CI/CD, Automation, Testing 🏢 Description: As a Software Development Engineer (Automation & Operational Excellence) you will be responsible for: We are hiring a Software Development Engineer focused on operational excellence. This role will drive automation of manual workflows, improve system reliability, and build robust CI/CD and testing pipelines. Responsibilities: - Automate manual processes and operational workflows - Build and maintain CI/CD pipelines - Develop integration and end-to-end testing frameworks - Improve system reliability, observability, and deployment processes - Collaborate across teams to streamline engineering operations - Identify inefficiencies and implement scalable solutions Qualifications: - 5+ years of software engineering experience - Strong experience with CI/CD tools (e.g., Jenkins, GitHub Actions, GitLab CI) - Experience with integration testing and automation frameworks - Proficiency in Python, Java, or similar languages - Understanding of cloud platforms (AWS, GCP, or Azure) - Experience using AI tools to enhance developer productivity Salary Range: $105,000 – $135,000 All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Automation & Controls Engineer role focused on developing advanced robotic manufacturing and industrial automation systems for next-generation factory modules. The position involves PLC, HMI, and SCADA development, controls architecture, commissioning, and collaboration with cross-functional engineering teams in a fast-paced R&D and production environment. 🗂️ Requirements: 5+ years industrial automation controls experience, IEC 61131-3 Structured Text programming, Ability to access US export-controlled information, Experience with PLC, HMI, and SCADA systems, Experience with industrial automation hardware and motion control, Experience with industrial networking, Experience with electrical control panel design, Experience with industrial safety systems and risk assessments, Experience with SCADA and factory data platforms, Technical leadership experience 📃 Skills: PLC, HMI, SCADA, IEC61131-3, StructuredText, Beckhoff, TwinCAT, NEC, NFPA79, UL508A, EPlan, AutoCAD, Fieldbus, MotionControl, Networking, FSoE, PROFIsafe, SCADA, Databases, Dashboards, Robotics, Git, SOLID, UnitTesting 🏢 Description: Purpose The Automation & Controls Engineer will support the development of flexible robotic manufacturing systems, core to the Divergent Adaptive Production System (DAPS). The ideal candidate has a track record of successfully architecting and deploying advanced automated systems in a quick changing, start-up environment. This role will take a hands-on execution approach and use their hardware and software skills to create bleeding-edge industrial automation systems, support production operations, and democratize factory data to support key business decisions. The Role - Develop PLC, HMI & SCADA software & controls architectures for the next generation of DAPS factories & factory modules. - Contribute to automation standards, frameworks, best practices, and platform selection. - Architect new advanced automation systems, ultimately leading to detailed design, development, and commissioning of first article factory modules. - Develop controls systems for new and experimental processes in an R&D environment. - Understand and steer production operations requirements for factory modules leading to increased overall factory OPE through better development of modules and factory data. - Work closely with cross-functional technical teams to ensure that program deliverables and milestones are defined, scheduled, and executed on time and budget. - Support engineering teams in achieving resolution of any gridlock and drive hands-on execution under intense time constraints. Basic Qualifications - Ability to lawfully access information and technology that is subject to US export controls. - 5 years of industrial automation controls experience in dynamic environments. - IEC 61131-3 Structured Text programming experience. Preferred Qualifications - Strong knowledge of NEC, NFPA 79, UL508A standards. - Experience designing electrical control panels using EPlan or AutoCAD. - Advanced experience working with the Beckhoff TwinCAT & hardware ecosystem. - Advanced experience with industrial automation hardware, fieldbus interfaces and motion control. - Advanced industrial networking experience. - Experience with industrial safety systems, risk assessments and safety over fieldbus protocols including FSoE and PROFIsafe. - Experience developing SCADA and factory data management platforms, industrial databases, dashboards. - Experience with industrial robot platforms, offline programming, and virtual commissioning. - Experience with industrial electrical schematic tools such as EPlan or AutoCAD Electrical. - Experience with software engineering practices, object-oriented programming, SOLID principles, unit testing, and development tools such as Git. - Technical leadership experience in defining standards, methods, processes, and training. Work Environment - Office and factory environment. - 100% onsite. - Minimal travel. - Work near moving mechanical parts. Compensation - Engineer II / E04: $111,300 - $166,960 - Senior / E05: $128,520 - $192,780 What We Offer - Competitive salary, equity plan, and discretionary bonus opportunities. - Paid vacation, sick time, company holidays, and year-end shutdown. - Paid parental leave. - Comprehensive health and wellness benefits including HMO and PPO options. - Company-sponsored life insurance and disability coverage. - Learning and development reimbursement opportunities. - Collaborative and high-performing work environment. Equal Employment Opportunity Divergent is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to protected characteristics. E-Verify The company participates in E-Verify to confirm employment eligibility in the United States. Los Angeles Fair Chance Initiative for Hiring Ordinance Qualified applicants with arrest and conviction records will be considered for employment.

🏢 Summary: Long-term Automation Engineer role focused on building and maintaining automated test solutions in a modern tech environment, with partial onsite work in Gdynia. The position emphasizes Python-based automation, API and Big Data testing, and integration with CI/CD pipelines. Candidates will work with contemporary tools and frameworks to design scalable, high-quality test automation solutions. 🗂️ Requirements: Proficiency in Python for test automation, Experience with PyTest, Robot Framework or similar frameworks, Experience with Git and CI/CD tools, Knowledge of API testing, Experience in Big Data testing, Experience with Cosmos DB, Understanding of web technologies, Experience with browser automation tools, Ability to work onsite in Gdynia 1 day per week 📃 Skills: Python, PyTest, RobotFramework, Git, Jenkins, GitLab, Postman, Requests, CosmosDB, Fabric, HTML, CSS, JavaScript, Selenium, CI/CD, BigData 🏢 Description: Automation Engineer 📌 We are seeking a highly experienced Automation Engineer on behalf of our client a well-known and fast-growing technology company offering a stable, long-term project in a modern environment. 📍 Work mode: Gdynia - 1 day per week from the office • Proficiency in Python programming for test automation. • Experience with automation frameworks such as PyTest, Robot Framework, or similar. • Familiarity with version control systems (e.g., Git) and CI/CD tools (e.g., Jenkins, GitLab CI). • Knowledge of API testing and tools (e.g., Postman, Requests library). • Big Data Testing skills • Focus on PyTest, Cosmos DB Experience on Fabric will helpful • Understanding of web technologies (HTML, CSS, JavaScript) and browser automation tools (e.g., Selenium). Desired skills: • Hands on experience leveraging AI tools to assist with test preparation and the design of test automation scripts ✅ Benefits: Work with modern technologies and international teams Long-term and stable cooperation Professional growth opportunities 📩 If you’re interested and meet the qualifications, please send your CV to Alina Pchelnikova at alina.pchelnikova@dcvtechnologies.co.uk

🏢 Summary: The offer is for an Electrical Engineer responsible for designing and developing electrical systems for robotic platforms, including schematics, PCB layouts, system integration, and hardware validation. The role involves prototype support, troubleshooting, design verification testing, and cross-functional collaboration with mechanical and embedded software teams. It is suited for candidates with strong hands-on experience in electrical design, debugging, and lab-based testing within fast-paced development environments. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related field, Experience with electrical design, prototyping, and debugging, Ability to design schematics and PCB layouts, Experience troubleshooting hardware and system-level issues, Familiarity with lab tools (oscilloscopes, multimeters, power supplies, logic analyzers), Experience supporting prototype builds and system bring-up, Ability to perform testing and validation activities (DVT or similar), Ability to document designs and test results 📃 Skills: PCB, Schematics, Debugging, DVT, Oscilloscope, Multimeter, PowerSupplies, LogicAnalyzers, EmbeddedSystems, Sensors, Actuators, MotorControl, BenchTesting, SystemIntegration 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. As an Electrical Engineer you will be responsible for; Design and develop electrical systems and circuits for robotic platforms, including schematics, PCB layouts, and system integration. Support prototype builds, including wiring, bring‑up, debugging, and validation of hardware systems. Troubleshoot and resolve electrical and system-level issues during development and testing. Assist with Design Verification Testing (DVT) and other validation activities to ensure product performance and reliability. Collaborate cross‑functionally with mechanical, embedded software, and systems engineering teams to ensure seamless system integration. Perform bench testing, data collection, and analysis to evaluate system performance and identify improvements. Document designs, test results, and troubleshooting findings to support development and future production. Qualifications; Bachelor's degree in Electrical Engineering or related field. Experience with electrical design, prototyping, and debugging (robotics or hardware systems preferred). Familiarity with lab tools such as oscilloscopes, multimeters, power supplies, and logic analyzers. Exposure to embedded systems, sensors, actuators, or motor control is a plus. Experience with testing and validation (DVT or similar) is preferred but not required. Strong problem‑solving skills and ability to work in a fast‑paced development environment. Salary Range: $120k-$170k All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.