Electrical Engineer

🏢 Summary: Electrical Engineer role focused on designing and developing electrical systems for car wash equipment, including PLC-based controls, motor drives, sensors, and industrial automation components. The position involves electrical design, testing, troubleshooting, manufacturing support, and compliance with industry standards in an onsite industrial engineering environment. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related discipline, 3+ years of experience in industrial, automation, or heavy equipment electrical engineering, Knowledge of industrial electrical systems, Experience with PLCs, HMIs, VFDs, sensors, motors, and industrial communication protocols, Ability to create and maintain electrical schematics and wiring diagrams, Familiarity with NEC, UL 508, UL73, and electrical safety standards, Hands-on troubleshooting of electrical and control systems, Proficiency with engineering documentation tools and Microsoft Office, Experience with electrical CAD software, Ability to translate technical requirements into manufacturing instructions 📃 Skills: PLC, HMI, VFD, CAD, NEC, UL508, UL73, Motors, Sensors, Actuators, Relays, PowerSupplies, Grounding, Automation, MicrosoftOffice 🏢 Description: As Electrical Engineer you will be responsible for: - Design and develop electrical schematics, wiring diagrams, and control panel layouts for car wash equipment, including PLC-based control systems, motor drives, sensors, and actuators. - Select and specify electrical components such as PLCs, HMIs, VFDs, relays, power supplies, motors, and safety devices. - Ensure electrical designs comply with applicable codes and standards (e.g., NEC, UL 508 and UL73, and relevant local or environmental regulations). - Collaborate with mechanical engineering to ensure proper integration of electrical and mechanical systems within equipment designs. - Support manufacturing by providing clear build documentation, troubleshooting electrical issues on the production floor, and assisting with first article builds. - Develop and execute electrical testing and validation plans, including functional testing, safety testing, and failure analysis. Qualifications: - Bachelor's degree in Electrical Engineering or a related engineering discipline. - 3+ years of experience in electrical engineering within industrial, automation, or heavy equipment manufacturing environments. Functional / Technical Knowledge, Skills & Abilities: - Strong knowledge of industrial electrical systems, including power distribution, control circuits, and grounding. - Experience with PLCs, HMIs, VFDs, sensors, motors, and industrial communication protocols. - Ability to read, create, and maintain electrical schematics and wiring diagrams. - Familiarity with applicable electrical codes, safety standards, and certification requirements. - Hands-on troubleshooting skills for electrical and control system issues. - Proficiency with engineering documentation tools and Microsoft Office; experience with electrical CAD software preferred. - Ability to translate technical requirements into clear, actionable instructions for manufacturing and service teams. Salary Range: $95,000 - $135,000 Location: Onsite in Arvada, CO The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. Drug Screening Requirement: All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Staff Electrical Hardware Design Engineer role focused on full-cycle PCBA development for high-reliability, spaceflight hardware, from concept through flight readiness and low-volume production. The position involves leading board-level design, bring-up, testing, and cross-functional integration with RF, mechanical, FPGA/SoC, and software teams. The role also includes mentoring engineers, driving manufacturing scale-up, and ensuring compliance with space and export regulations. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related field, 8+ years of experience designing and debugging PCBAs, Proficiency in Altium Designer or similar ECAD tools, Hands-on experience with lab instruments, Strong knowledge of digital communication buses (I2C, SPI, UART, RS422, CAN, USB, PCIe, Ethernet), Experience with board bring-up, test planning, and design verification, Experience working with contract manufacturers and DFM reviews, U.S. Person status or eligibility under ITAR/export regulations 📃 Skills: Altium, ECAD, PCBA, I2C, SPI, UART, RS422, CAN, USB, PCIe, Ethernet, Python, C, FPGA, SoC, EMI, EMC, GNSS, ADCS, Oscilloscope 🏢 Description: Location: This role is based onsite at our Louisville, CO office. Travel: Up to 10%, domestic or international. The Role As a Staff Electrical Hardware Design Engineer, you will take ownership of full-cycle PCBA designs, from early concept to flight readiness. You will work cross-functionally with RF, mechanical, software, FPGA/SoC, and operations teams to bring high-reliability, space-ready electronics to orbit. You will guide the Electrical Engineering team on special topics and present across disciplines to help facilitate ideas, product readiness, and conduct reviews. Responsibilities Own the full electrical design lifecycle for complex spaceflight hardware: concept of operations, requirements engineering, schematic capture, layout, bring-up, test, and manufacturing handoff. Develop robust analog/digital designs for mission-critical systems under environmental and performance constraints. Organize collaborative cross-disciplinary design reviews and shape solutions with experienced engineers. Provide input to schedule planning, hardware requirements, and process improvements. Lead board-level bring-up and debugging, integrating firmware/software/FPGA with embedded systems. Define test plans and verification strategies that meet flight readiness requirements. Scale manufacturing from prototype to low-volume production. Collaborate with mechanical, RF, software, FPGA/SoC, and systems teams for seamless integration. Mentor early-career engineers and contribute to process improvements. Engage with external vendors and contract manufacturers, resolve DFM/DFT issues, and ensure on-time delivery. Drive failure analysis and root-cause investigations for flight or test anomalies. What Success Looks Like Consistently deliver flight-quality hardware on schedule with minimal oversight. Identify system-level risks early and drive mitigations. Communicate effectively across hardware, software, and cross-functional teams. Make data-driven trade-offs in constrained environments. Demonstrate curiosity in advanced areas such as architecture optimization and radiation mitigation. Exhibit advanced, wide-ranging experience in electrical engineering. Align stakeholders and document work concisely. Qualifications Bachelor's degree in Electrical Engineering or related field. 8+ years of experience designing and debugging PCBAs. Proficiency in Altium Designer or similar ECAD tools. Hands-on experience with lab instruments (oscilloscopes, logic analyzers, power analyzers). Solid understanding of digital buses (I2C, SPI, UART, RS422, CAN, USB, PCIe, Ethernet). Experience with board bring-up, test planning, and design verification workflows. Experience interacting with contract manufacturers and supporting DFM reviews. Strong documentation and organizational skills. Must meet U.S. export control and ITAR requirements. Required Qualification Master's degree in Electrical Engineering or related field. Experience designing for harsh environments (thermal, vacuum, vibration). Familiarity with high-speed design and impedance-controlled layouts. Basic scripting or automation in Python or C for hardware test workflows. Exposure to radiation effects and mitigation in electronic design. Familiarity with EMI/EMC design practices and validation. Familiarity with satellite electrical systems engineering (EPS, GNSS, ADCS, propulsion, space robotics). Compensation Base salary range: $145,920 - $192,047, determined by education, qualifications, experience, and market data. Benefits include medical, dental, and vision plans, 401(k) matching, unlimited PTO, paid holidays, parental/adoption leave, legal insurance, and a home technology stipend. US Technical Jobs Employment is contingent on verifying U.S. Person status or obtaining necessary export control authorization for access to export-controlled technology and government contracts work.

🏢 Summary: Electrical Engineer role focused on designing and supporting industrial electrical systems for car wash equipment, including PLC-based controls, wiring, testing, and manufacturing support. The position involves collaboration with mechanical engineering and ensuring compliance with electrical codes and safety standards. Onsite role in Arvada, CO with salary range of $95,000–$135,000. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related discipline, 3+ years of electrical engineering experience in industrial, automation, or heavy equipment manufacturing, Knowledge of industrial electrical systems, Experience with PLCs, HMIs, VFDs, sensors, motors, and industrial communication protocols, Ability to create and maintain electrical schematics and wiring diagrams, Familiarity with electrical codes and safety standards, Hands-on troubleshooting skills for electrical and control systems, Proficiency with engineering documentation tools and Microsoft Office, Experience with electrical CAD software, Ability to translate technical requirements into manufacturing instructions 📃 Skills: PLC, HMI, VFD, CAD, Microsoft, NEC, UL508, UL73, Sensors, Motors, Actuators, Relays, Power, Grounding, Testing, Troubleshooting, Automation 🏢 Description: As Electrical Engineer you will be responsible for: - Design and develop electrical schematics, wiring diagrams, and control panel layouts for car wash equipment, including PLC-based control systems, motor drives, sensors, and actuators. - Select and specify electrical components such as PLCs, HMIs, VFDs, relays, power supplies, motors, and safety devices. - Ensure electrical designs comply with applicable codes and standards (e.g., NEC, UL 508 and UL73, CE (not applicable- only for EU products), and relevant local or environmental regulations). - Collaborate with mechanical engineering to ensure proper integration of electrical and mechanical systems within equipment designs. - Support manufacturing by providing clear build documentation, troubleshooting electrical issues on the production floor, and assisting with first article builds. - Develop and execute electrical testing and validation plans, including functional testing, safety testing, and failure analysis. Qualifications: - Bachelor's degree in Electrical Engineering or a related engineering discipline. - 3+ years of experience in electrical engineering within an industrial, automation, or heavy equipment manufacturing environments. Functional / Technical Knowledge, Skills & Abilities: - Strong knowledge of industrial electrical systems, including power distribution, control circuits, and grounding. - Experience with PLCs, HMIs, VFDs, sensors, motors, and industrial communication protocols. - Ability to read, create, and maintain electrical schematics and wiring diagrams. - Familiarity with applicable electrical codes, safety standards, and certification requirements. - Hands-on troubleshooting skills for electrical and control system issues. - Proficiency with engineering documentation tools and Microsoft Office; experience with electrical CAD software preferred. - Ability to translate technical requirements into clear, actionable instructions for manufacturing and service teams. Salary Range: $95,000 - $135,000 The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Electrical Engineering role focused on designing and validating power and signal distribution systems for autonomous vehicles. The position involves creating electrical schematics, wiring harness designs, and test plans, as well as troubleshooting and supporting EMC certification in prototype vehicles. Candidates will work cross-functionally to implement detailed AV system designs into vehicle platforms and oversee system testing and validation. 🗂️ Requirements: 6+ years of experience in electrical engineering, Bachelor's degree or higher in Electrical Engineering, Ability to read and interpret schematics and assembly drawings, Experience with lab equipment: power supplies, oscilloscopes, function generators, multimeters, Familiarity with wire harness design process and related software tools, Experience with vehicle communication networks: CAN, CAN-FD, Automotive Ethernet, LIN, Strong troubleshooting and debugging skills, Ability to perform hands-on debugging during testing and evaluation 📃 Skills: CAN, CAN-FD, Ethernet, LIN, DFMEA, EMC, Oscilloscope, Multimeter, PowerSupply, FunctionGenerator, WireHarness, Schematics, Simulation 🏢 Description: Mission Summary You will be responsible for power and signal distribution design for Autonomous Vehicles. You will work cross functionally to gather details required for proper connections, generate system diagrams, electrical schematics, wiring harness diagrams, and assist with assembly and build documentation. You will also create detailed component and system qualification and validation test plans, and perform and oversee testing. What you'll be doing: - Quickly gain a deep understanding of system architecture and specifications to implement the detailed electrical design of the AV system into a vehicle platform. - Work within an interdisciplinary team to troubleshoot, test, and fix electrical and system issues in prototype vehicles and test fixtures. - Support product design reviews. - Review internal and external requirements and specification documentation. - Perform worst case analysis and simulation to ensure compliance to system requirements. - Generate system diagrams, electrical schematics, wiring harness diagrams, and assist with assembly and build documentation. - Create detailed component and system qualification and validation test plans and perform / oversee testing. - Support EMC certification testing and develop and maintain electrical DFMEA. - Utilize structured problem-solving techniques for test failure resolution. What we're looking for: - 6+ years of experience in electrical engineering. - Ability to read and interpret schematics and assembly drawings. - Lab equipment experience with power supplies, oscilloscopes, function generators, and multimeters. - Familiarity with wire harness design process and software tools to help design vehicle power and signal distribution. - Ability to multitask across various project activities and work with a global team. - Ability to provide hands-on debugging as needed during testing and evaluation. - Experience with vehicle communication networks (CAN, CAN-FD, Automotive Ethernet, LIN). - Strong troubleshooting and debugging skills. - Bachelor's degree or higher in Electrical Engineering. Benefits: Candidates are eligible to participate in a benefits program including medical, dental, vision, 401k with company match, health savings accounts, life insurance, pet insurance, and more. Salary Range: $125,000—$167,000 USD

🏢 Summary: Staff Electrical Engineer role focused on full lifecycle PCBA design and validation for advanced battery technology within a BMS Hardware & Electrical System team. The position involves cross-functional collaboration to develop high-power, safety-compliant electrical systems and PCBAs for innovative energy storage applications. 🗂️ Requirements: Bachelor's degree in Electrical Engineering, Computer Engineering, or related field with 7+ years of experience, OR Master's degree with 5+ years of experience, Proficiency in Altium or equivalent ECAD software, Experience with sensors and power electronics, Experience with MCU, MPU, SOM processing systems, Experience with Ethernet, CAN-FD, isoSPI networking, Experience with SPI, UART, I2C, JTAG communication protocols, Experience with IO, ADC, DAC data acquisition systems, Experience with gate drivers, motor drivers, HSD control systems, Understanding of safety and compliance standards for high-power systems, Experience designing PCBAs to UL 991, UL 1973, UL 9540, UL 1998 requirements, Familiarity with PLM, JIRA, and requirements management tools, Strong problem-solving and cross-functional collaboration skills 📃 Skills: Altium, ECAD, PCBA, Ethernet, CAN-FD, isoSPI, SPI, UART, I2C, JTAG, ADC, DAC, MCU, MPU, SOM, SMPS, LDO, JIRA, JAMA, Arena, Teamcenter, DFMEA, CFMEA 🏢 Description: We are hiring a Staff Electrical Engineer to impact development and validation of groundbreaking battery technology. As part of the BMS Hardware & Electrical System team, you will be responsible for the full lifecycle of PCBA design — from requirements generation, component selection, schematic and layout development, design release through vendor DFM, bring up, verification, configuration management, and sustaining. You will work cross-functionally with mechanical, firmware, and manufacturing teams to deliver PCBAs that meet the highest safety and compliance standards. This is an exciting opportunity to help shape and be part of the growth of a fast-moving company with breakthrough technology and an incredible mission. Responsibilities • Responsible for the full lifecycle of PCBA design — from requirements generation, component selection, schematic and layout development, design release through vendor DFM, bring up, verification, configuration management, and sustaining • Ensure PCBA designs meet safety, reliability, and compliance standards for high-power and hazardous systems • Create requirements, DFMEA/CFMEA, electrical block diagrams, simulations, analysis, schematics, layouts, bring-up/test plans, and 8 Discipline (8D) reports • Work cross-functionally with System Engineering, Mechanical/Electro-Mechanical, Firmware/Software, and Test/Verification teams to define, design, and test PCBAs and resolve electrical system related issues • Support troubleshooting, maintenance, and continuous improvement of released PCBA designs • Document design concepts, architecture, block diagrams, bring-up/test results, root cause investigations, and decision matrices Qualifications • Bachelor's degree in Electrical Engineering, Computer Engineering, or a related field with 7+ years of relevant experience (battery or energy storage systems experience is a plus); OR Master's degree with 5+ years of relevant experience • Proficiency in PCBA design ECAD software Altium or equivalent • Hands-on experience with sensors, power electronics (high voltage, high power, AC, SMPS, LDO), processing (MCU, MPU, SOM), networking (Ethernet, CAN-FD, isoSPI), onboard communication (SPI, UART, I2C, JTAG), data acquisition (IO, ADC, DAC), and control systems (gate drivers, motor drivers, HSD) • Strong understanding of safety and compliance considerations in high-power and/or chemical environments • Demonstrated experience designing PCBAs and electrical systems to UL 991, 1973, 9540, and 1998 requirements • Excellent problem-solving skills, with the ability to balance speed, rigor, and safety • Familiarity with PLM software (e.g. Arena or Team Center), product development software (e.g. JIRA), and requirement management tools (e.g. JAMA) • Strong communication and collaboration skills, with the ability to work independently and cross-functionally in a fast-paced environment Salary Range • $120,000-135,000 • The actual salary offered is dependent on various factors including location, qualifications, skills, education, training, and experience All qualified applicants will receive consideration for employment without discrimination based on protected characteristics. Compliance Notice • Employment is subject to federal contractor compliance requirements. • Candidates selected for employment must successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Opportunity for an Electrical Hardware Design Engineer to lead the end-to-end design and development of circuit cards and electronics hardware for spacecraft and mission-critical aerospace systems. The role involves hands-on schematic capture, PCB layout, bring-up, testing, and integration of analog, digital, mixed-signal, and power electronics in demanding space environments. This is a highly technical, on-site position requiring ownership of flight hardware from concept through production. 🗂️ Requirements: Bachelor’s degree in Electrical Engineering, Computer Engineering, or related field, 3+ years of professional electrical engineering experience, Experience designing circuit cards, schematics, and PCBs for spacecraft, aerospace, defense, or high-reliability applications, Experience with spacecraft hardware or spacecraft electrical systems, Experience with flight systems, avionics, or mission-critical electrical hardware, Strong knowledge of analog and digital circuit design, Experience with schematic capture and PCB design using Altium Designer, Experience owning board-level hardware through design, layout, bring-up, debugging, and testing, Experience with component selection and technical documentation, U.S. citizenship or lawful permanent residency (ITAR compliance), Ability to maintain or obtain a Government Security Clearance 📃 Skills: Altium, PCB, Analog, Digital, Mixed-signal, Power, EMI, EMC, Avionics, Embedded, Signal-integrity, Thermal, Vibration, Vacuum, ITAR 🏢 Description: A New Paradigm For Space Operations. Who We Are: Drones have fundamentally changed the nature of conflict and maneuver. The next theater to be changed by drone technology is space. Space Kinetic is a space technology startup company building a completely new architecture for space operations – one that brings the advantages of drone technology to space missions without relying on consumable fuel. This is not a role for someone looking for a traditional 40-hour work week.Space Kinetic is building ambitious, first-of-its-kind technology, and that requires urgency, ownership, anda high levelof commitment to changing the foundational assumptions for everything we do in space. Position Overview: As a Senior Electrical Hardware Design Engineer you will own the design, development, integration, and testing of circuit cards and related electronics hardware for spacecraft and other advanced aerospace and defense systems. You will work closely with mechanical, software, systems, manufacturing, and test engineers to develop space rated flight hardware that performs reliably in demanding environments. What You'll Do: Design, develop, and validate schematics, PCB layouts, circuit cards, electrical interfaces, and supporting electronics hardware. Own circuit card design from concept through schematic capture, PCB layout, bring-up, debugging, testing, and release. Develop analog, digital, mixed-signal, and power electronics designs for embedded systems, sensors, actuators, controllers, and related flight hardware. Perform component selection, circuit analysis, worst-case analysis, derating reviews, and design trade studies. Support PCB stack-up definition, grounding strategies, signal integrity considerations, power integrity considerations, and EMI/EMC design practices. Work closely with mechanical and thermal teams to support electronics packaging, board-level thermal management, heat dissipation strategies, and environmental constraints. Develop and execute electrical test plans for circuit cards, subsystems, and integrated hardware. Collaborate with firmware, software, and controls teams to integrate electronics hardware with embedded processors, sensors, communication interfaces, and control systems. Support design for manufacturability, design for test, prototype builds, supplier coordination, and transition from engineering development to repeatable production. Drive rapid design iterations in a hands-on development environment where hardware is designed, built, tested, and improved quickly. What It Takes: Basic Qualifications: Bachelor's degree in Electrical Engineering, Computer Engineering, or related engineering discipline. 7+ years of professional electrical engineering experience. Experience designing electrical hardware, circuit cards, schematics, and PCBs for spacecraft, satellites, aerospace, defense, or other high-reliability applications. Experience working on spacecraft hardware or spacecraft electrical systems. Experience with flight systems, flight electronics, avionics, or other mission-critical electrical hardware. Strong understanding of analog and digital circuit design. Experience with schematic capture and PCB design using Altium Designer. Experience owning board-level hardware through design, layout, bring-up, debugging, and testing. Experience selecting components and working with datasheets, reference designs, and supplier documentation. Strong engineering fundamentals and ability to make sound design decisions with incomplete information. Preferred Qualifications Master's degree in Electrical Engineering, Computer Engineering, or related field. 9+ years of experience designing electronics for spacecraft, satellites, launch vehicles, missile systems, aircraft, defense systems, or other mission-critical hardware. Experience with flight-qualified or flight-intent hardware development. Experience with mixed-signal PCB design, power electronics, motor controllers, sensor interfaces, battery-powered systems, or embedded control hardware. Experience with board-level thermal management, electronics packaging, heat sinking, thermal interfaces, and thermal testing. Experience with high-density PCB design, impedance-controlled routing, grounding strategies, stack-up definition, and signal integrity best practices. Knowledge of EMI/EMC design practices and qualification testing. Experience with environmental testing including vibration, shock, thermal, and vacuum testing. Experience working with PCB fabricators, contract manufacturers, component suppliers, and external test labs. Familiarity with aerospace standards, high-reliability design practices, and configuration-controlled hardware development. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder). Ability to maintain or obtain a Government Security Clearance. What You'll Bring Strong technical judgment and engineering fundamentals. A hands-on approach to electrical design, debugging, and problem solving. Deep interest in circuit card design and the details that make electronics reliable in real-world environments. Ability to work across electrical, mechanical, thermal, software, manufacturing, and systems engineering disciplines. Comfort operating in an environment with ambitious schedules, evolving requirements, and challenging technical goals. A practical understanding of how design choices affect manufacturability, testability, reliability, and performance. A desire to see hardware through the full lifecycle — from concept and schematic design to PCB layout, bring-up, qualification, integration, and fielded operation. *Our vision is unique, and so is the team we're building. If you're driven to succeed in this role, even if your background doesn't fully align with every qualification, we want your application. Where You'll Be: The position will be on site at our headquarters in El Segundo, CA. What We Offer: Competitive Base Salary + Equity-Based Compensation Highly Competitive PTO and Holiday Calendar Comprehensive Medical, Dental, and Vision Coverage Unique Performance-Based Bonus Structure ITAR Requirements: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades aredeterminedby role, level, location, and alignment with market data.Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range $120,000 – $160,000The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$120,000—$160,000 USD

🏢 Summary: Senior Mixed Signal Electrical Engineer role focused on designing and maturing advanced electrical prototypes for space systems, including custom motor controllers, embedded systems, and power electronics for flight-ready applications. The position involves analog and digital circuit design, PCB development, testing, debugging, and cross-functional collaboration in a fast-paced aerospace startup environment. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related STEM field, 7+ years of hands-on electrical engineering experience, Experience developing hardware for aerospace, defense, robotics, or similar industries, Experience designing analog circuitry, Experience designing digital circuitry and output drivers, Experience working with embedded systems, Proficiency in circuit design, schematic creation, and component selection, Experience with schematic and PCB design tools, Experience building and testing electrical systems or prototypes, Strong understanding of electronics fundamentals and system integration, Ability to troubleshoot circuits and debug hardware, Hands-on experience with lab equipment, Experience collaborating with PCB fabrication and assembly vendors, Ability to work in a fast-paced startup environment, U.S. citizenship, permanent residency, or eligibility under ITAR regulations, Ability to obtain or maintain Government Security Clearance 📃 Skills: Altium, PCB, Embedded, C, Microcontrollers, Sensors, Electronics, Oscilloscopes, Multimeters, Power, Schematics, ICDs, BOMs, Debugging, Testing, Circuitry 🏢 Description: A New Paradigm For Space Operations. Who We Are: Drones have fundamentally changed the nature of conflict and maneuver. The next theater to be changed by drone technology is space. Space Kinetic is a space technology startup company building a completely new architecture for space operations – one that brings the advantages of drone technology to space missions without relying on consumable fuel. This is not a role for someone looking for a traditional 40-hour work week.Space Kinetic is building ambitious, first-of-its-kind technology, and that requires urgency, ownership, anda high levelof commitment to changing the foundational assumptions for everything we do in space. Position Overview: The Senior Electrical Engineer, Power Electronics & Embedded Systems (Mixed Signal) will play a critical role in designing, building, and maturing prototypes for Space Kinetic's core technology. You will design systems that process both analog and digital signals and bridge the gap between real-world physical inputs like pressure and temperature sensors and the processor in an embedded system. With your knowledge of analog electronics, you will design signal conditioning circuitry and with additional knowledge of discrete electronic components and integrated circuits, you will help design actuator controllers like the driver circuitry required in a motor controller and the interfaces to power electronics. You will support the team in refining the electrical architecture of the current prototype and driving the system closer to a flight-ready configuration with each iteration.Your first project will involve a custom motor controller with power levels never before implemented in space and an electromechanical system with novel energy recycling functions. This role is ideal for someone who enjoys taking concepts from schematic to hardware, solving complex electrical challenges, and working closely with mechanical and manufacturing teams to bring cutting-edge space hardware to life. What You'll Do: Design, develop, and build electrical prototypes for Space Kinetic's core technology. Refine and finalize the current prototype's electrical design to support all phases of prototype maturation. Undertake and complete circuit design tasks, generate detailed schematics, and perform component selection aligned with environmental and system requirements. Apply detailed tolerancing, design-for-manufacture principles, and thorough documentation across all electrical prototype phases. Support PCB layout design and coordinate with external vendors for fabrication and assembly of PCB components. Collaborate closely with the Space Kinetic manufacturing and engineering team to integrate electrical systems into mechanical assemblies. Verify and validate your electrical designs through testing, troubleshooting, debugging, and iteration to improve system reliability and performance. Actively participate in design reviews, contribute to system-level engineering discussions, and ensure the electrical subsystem progresses toward flight-readiness. Support the creation and maintenance of electrical documentation, including BOMs, wiring diagrams, interface control documents (ICDs), and test procedures. Ensure each design iteration moves the system closer to a flight-ready prototype aligned with Space Kinetic's 2-year flight demonstration goal. What It Takes: Basic Qualifications: Bachelor's degree in electrical engineering or a closely related STEM (Science, Technology, Engineering and Mathematic) field. Experience developing hardware for aerospace, defense, robotics, or similarly rigorous applications. A minimum of 7 years of hands-on electrical engineering experience, ideally involving prototype development. Experience designing analog circuitry such as signal conditioning circuitry. Experience designing digital circuitry and output drivers such as gate drivers and motor drivers. Experience working with embedded systems. Proficiency in circuit design, schematic creation, and component selection. Experience working with Schematic / PCB design tools (e.g., Altium). Demonstrated experience building and testing electrical systems or prototypes. Strong understanding of electronics fundamentals, wiring practices, and system integration. Ability to troubleshoot circuits, debug hardware, and iterate rapidly. Hands-on experience with lab equipment (oscilloscopes, multimeters, power supplies, logic analyzers). Experience collaborating with vendors for PCB fabrication and assembly. Excellent documentation, communication, and cross-functional collaboration skills. Ability to work in a fast-paced startup environment with evolving requirements. To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder). Ability to maintain or obtain a Government Security Clearance. Preferred Qualifications A minimum of 9 years of hands-on electrical engineering experience. Experience in developing embedded systems. Experience in developing power electronics. Experience with the C programming language. Knowledge of field-oriented controls, microcontrollers, sensors, and power electronics. Experience with environmental or functional testing of electrical systems. *Our vision is unique, and so is the team we're building. If you're driven to succeed in this role, even if your background doesn't fully align with every qualification, we want your application. Where You'll Be: The position will be on site at our headquarters in El Segundo, CA. What We Offer: Competitive Base Salary + Equity-Based Compensation Highly Competitive PTO and Holiday Calendar Comprehensive Medical, Dental, and Vision Coverage Unique Performance-Based Bonus Structure ITAR Requirements: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here Equal Employment Opportunity: Space Kinetic provides equal employment opportunities to all employees and applicants without regard to race, color, religion, age, sex, gender identity, sexual orientation, national origin, veteran status, disability or any other legally protected status. The annual base salary for this role is below. Pay Grades aredeterminedby role, level, location, and alignment with market data.Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range $140,000 – $180,000The annual base salary for this role is below. Pay Grades are determined by role, level, location, and alignment with market data. Individual pay will be determined on a case-by-case basis and may vary based on the following considerations: interviews and an assessment of several factors that are unique to each candidate, job-related skills, relevant education/experience, certifications, abilities of the candidate and internal equity. Pay Range$140,000—$180,000 USD

🏢 Summary: The role involves leading systems engineering and vehicle-level integration for automotive features such as Audio, Lighting, and Charging. You will define system specifications, coordinate cross-functional teams, and ensure full integration and validation of hardware and software components. The position requires deep debugging of complex ECU-based systems and execution of vehicle integration plans to ensure functional and safety compliance. 🗂️ Requirements: Bachelor's degree in Engineering, 5+ years of experience in systems engineering, Hands-on experience debugging complex multi-ECU automotive systems, Strong understanding of automotive hardware and software development processes, Experience with low voltage automotive systems (sources, sinks, distribution), Experience with Automotive CAN and LIN networks, Strong understanding of vehicle safety concepts and testing procedures, Ability to collaborate cross-functionally in fast-paced development environments 📃 Skills: SystemsEngineering, Automotive, ECU, CAN, LIN, CANape, CANalyzer, CANoe, Vflash, Debugging, Hardware, Software, Integration, LowVoltage, DCDC, WiringHarness, Diagnostics 🏢 Description: Summary: You will be responsible for supporting systems engineering for systems such as Audio, Lighting, Charging etc. You will be leading the specification and executing of systems integration plans for vehicle-level features and deliverables. Responsibilities: - Process product level requirements and pull together respective engineering teams to decompose into components, interfaces, dynamic behaviors, and resource consumption targets. - Support and review software and hardware design, implementation, and test cases. - Identify, document and highlight cross-functional gaps and dependencies; proactively work towards creative solutions to resolve integration issues and ensure vehicle functionality. - Work with test and integration engineers to ensure full test coverage is defined and implemented for software feature implementations. - Develop and execute vehicle integration plans, pulling together relevant sub-system components while keeping track of overall program milestones and delivery objectives. - Deep-dive into vehicle log data and source code if required to root-cause system-level issues and facilitate rapid issue resolution in collaboration with domain experts. Post root cause analysis, suggest changes to upstream processes and subsystems, including diagnostics and other tools. - Work across the company to contribute to a cohesive variant management strategy that operates efficiently, including but not limited to software build configurations and upgrade capabilities. Qualifications: - Bachelor's in Engineering. - 5+ years work experience in systems engineering. - Hands-on experience debugging complex systems that involve multiple ECUs with interfaces to various vehicle sub-systems. - Strong understanding of automotive hardware and software concepts and development processes. - Ability to work in a fast-paced development environment and proactively collaborate cross-functionally with other teams to solve vehicle-level integration problems. - Strong understanding of vehicle safety concepts and testing-related safety procedures. - Strong written and verbal communication skills. - Experience with Low Voltage sources (12V battery, Vehicle DCDC), Low Voltage sinks (Compute, vehicle motion actuators, lighting, vehicle ECUs, HVAC, etc.), Low Voltage distribution (wiring harnesses), Automotive CAN and LIN. - Experience with Vector tools and applications (CANape, CANalyzer, CANoe, Vflash) is preferred. Benefits: - Competitive compensation structure. - Benefits supporting professional growth and personal well-being. - Culture focused on high performance, collaboration, continuous improvement, and professional development. - California Pay Range: $68—$75 USD.

🏢 Summary: The offer is for an Electrical Engineer responsible for designing and developing electrical systems for robotic platforms, including schematics, PCB layouts, system integration, and hardware validation. The role involves prototype support, troubleshooting, design verification testing, and cross-functional collaboration with mechanical and embedded software teams. It is suited for candidates with strong hands-on experience in electrical design, debugging, and lab-based testing within fast-paced development environments. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related field, Experience with electrical design, prototyping, and debugging, Ability to design schematics and PCB layouts, Experience troubleshooting hardware and system-level issues, Familiarity with lab tools (oscilloscopes, multimeters, power supplies, logic analyzers), Experience supporting prototype builds and system bring-up, Ability to perform testing and validation activities (DVT or similar), Ability to document designs and test results 📃 Skills: PCB, Schematics, Debugging, DVT, Oscilloscope, Multimeter, PowerSupplies, LogicAnalyzers, EmbeddedSystems, Sensors, Actuators, MotorControl, BenchTesting, SystemIntegration 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. As an Electrical Engineer you will be responsible for; Design and develop electrical systems and circuits for robotic platforms, including schematics, PCB layouts, and system integration. Support prototype builds, including wiring, bring‑up, debugging, and validation of hardware systems. Troubleshoot and resolve electrical and system-level issues during development and testing. Assist with Design Verification Testing (DVT) and other validation activities to ensure product performance and reliability. Collaborate cross‑functionally with mechanical, embedded software, and systems engineering teams to ensure seamless system integration. Perform bench testing, data collection, and analysis to evaluate system performance and identify improvements. Document designs, test results, and troubleshooting findings to support development and future production. Qualifications; Bachelor's degree in Electrical Engineering or related field. Experience with electrical design, prototyping, and debugging (robotics or hardware systems preferred). Familiarity with lab tools such as oscilloscopes, multimeters, power supplies, and logic analyzers. Exposure to embedded systems, sensors, actuators, or motor control is a plus. Experience with testing and validation (DVT or similar) is preferred but not required. Strong problem‑solving skills and ability to work in a fast‑paced development environment. Salary Range: $120k-$170k All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Electrical Engineer role focused on designing and developing electrical systems for robotic platforms, including schematics, PCB layouts, prototyping, and system integration. The position involves hardware bring-up, debugging, testing, and cross-functional collaboration to ensure reliable product performance. Offers a competitive salary range and opportunity to work on advanced engineering projects. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related field, Experience with electrical design, prototyping, and debugging, Experience working with hardware systems, Familiarity with lab tools (oscilloscopes, multimeters, power supplies, logic analyzers), Ability to perform testing and validation activities, Strong problem-solving skills, Ability to work in a fast-paced development environment 📃 Skills: PCB, Schematics, Debugging, Prototyping, DVT, Oscilloscopes, Multimeters, PowerSupplies, LogicAnalyzers, EmbeddedSystems, Sensors, Actuators, MotorControl, BenchTesting, SystemIntegration 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. As an Electrical Engineer you will be responsible for; Design and develop electrical systems and circuits for robotic platforms, including schematics, PCB layouts, and system integration. Support prototype builds, including wiring, bring‑up, debugging, and validation of hardware systems. Troubleshoot and resolve electrical and system-level issues during development and testing. Assist with Design Verification Testing (DVT) and other validation activities to ensure product performance and reliability. Collaborate cross‑functionally with mechanical, embedded software, and systems engineering teams to ensure seamless system integration. Perform bench testing, data collection, and analysis to evaluate system performance and identify improvements. Document designs, test results, and troubleshooting findings to support development and future production. Qualifications; Bachelor's degree in Electrical Engineering or related field. Experience with electrical design, prototyping, and debugging (robotics or hardware systems preferred). Familiarity with lab tools such as oscilloscopes, multimeters, power supplies, and logic analyzers. Exposure to embedded systems, sensors, actuators, or motor control is a plus. Experience with testing and validation (DVT or similar) is preferred but not required. Strong problem‑solving skills and ability to work in a fast‑paced development environment. Salary Range: $120k-$170k All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.