Embedded Software Engineer

🏢 Summary: Opportunity for an experienced Embedded Systems Architect to lead architectural decisions and full lifecycle development of embedded products using real-time operating systems. The role involves defining system requirements, designing embedded architectures, managing SDLC processes, and collaborating with cross-functional teams. Candidates will work hands-on with C/C++ and RTOS environments to deliver robust, high-performance embedded solutions. 🗂️ Requirements: Bachelor’s degree in Electrical Engineering, Computer Science, or related field, Minimum 5 years of experience in embedded systems architecture and design, Proven experience in embedded software programming in C/C++, Experience with real-time operating systems (RTOS), Strong knowledge of embedded firmware requirements and design specifications, Experience with embedded Linux for real-time systems, Knowledge of software development processes and standards, Ability to generate and manage Technical Requirement Specifications 📃 Skills: C, C++, RTOS, Linux, ARM, x86, OPC-UA, Modbus, SQLite, Ethernet, IP, Agile, SDLC, Virtualization 🏢 Description: Responsibilities: Lead architectural decisions for embedded products, evaluating technical and business trade-offs. Work with Product Management and customers to understand needs and develop requirements early in the conceptual phase. Present and justify recommended systems and architectures to stakeholders. Create diagrams such as functional blocks, data flow, use case, sequence, block diagrams, signal flow, and architectural frameworks using Model-Based Systems Engineering. Design system architecture for embedded systems using real-time operating systems such as real-time Linux or other small-footprint OSs. Manage the full software development life cycle (SDLC) of embedded software. Design software development and deployment using virtual environments across host platforms running virtualization. Work in or lead development teams to accelerate product development. Education and Experience: Bachelor's degree in Electrical Engineering, Computer Science, or related field preferred. Minimum 5 years of experience in embedded systems architecture and design. Proven track record in embedded software programming in C/C++ and experience with real-time OS (RTOS). Qualifications: Strong knowledge of requirements and design specifications for embedded firmware systems, including hardware/software trade-offs and memory/processor performance optimization. Robust knowledge of software development processes and standards, embedded firmware development tools, Linux for real-time systems, Agile methodologies, industrial protocols, IP and Ethernet networking, and industrial process control. Knowledge of OS/kernel concepts, ARM and x86 microprocessors, inter-process communications, embedded web servers and web-based UIs, OPC-UA, Modbus, SQLite, and secure networking. Ability to generate and manage Technical Requirement Specifications. Strong analytical and problem-solving skills. Experience collaborating with cross-functional teams including production, testing, customer support, and supply chain. Excellent written and verbal communication skills with ability to produce clear technical documentation.

🏢 Summary: Embedded Software Engineer role focused on developing and maintaining ECU software for commercial vehicle applications using model-based development and embedded programming. The position covers the full software lifecycle including design, testing, debugging, integration, and validation in collaboration with cross-functional engineering teams. Experience with vehicle communication networks and embedded systems development is required. 🗂️ Requirements: Bachelor's degree in Computer Engineering, Electrical Engineering, Computer Science, or related field, 3+ years of embedded software development experience, Proficiency in MATLAB, Proficiency in Simulink, Experience with model-based development, Familiarity with CAN or J1939 communication protocols, Understanding of embedded software development lifecycle, Knowledge of coding standards and software development processes, Ability to work with multidisciplinary engineering teams 📃 Skills: MATLAB, Simulink, Stateflow, Embedded, C, C++, Firmware, AUTOSAR, CAN, J1939, ISOBUS, LIN, VisualStudio, Agile, Scrum, HIL, SIL, TDD 🏢 Description: We are seeking an Embedded Software Engineer to develop and maintain software solutions for electronic control systems used in commercial vehicle applications. This position involves the full software development lifecycle, including design, implementation, testing, debugging, and ongoing product support. The ideal candidate will have experience with model-based development, embedded programming, and vehicle communication networks while working collaboratively with cross-functional engineering teams. Position Overview Key Responsibilities - Design, implement, and maintain embedded software for electronic control units (ECUs) and related vehicle electronics. - Develop control algorithms using model-based development tools such as MATLAB and Simulink. - Analyze software defects, troubleshoot root causes, and implement corrective actions through resolution. - Support software verification and validation activities to ensure products meet functional, quality, and performance requirements. - Collaborate with systems, electrical, and test engineers to define software functionality and translate system requirements into robust software solutions. - Participate in software integration efforts and provide technical support throughout product development and production. - Document software changes, maintain development records, and contribute to continuous process improvements. - Ensure software is developed in accordance with established engineering standards, coding guidelines, and development processes. Required Qualifications - Bachelor's degree in Computer Engineering, Electrical Engineering, Computer Science, or a related technical discipline. - Three or more years of professional experience developing embedded software. - Proficiency with MATLAB and Simulink for model-based software development. - Familiarity with vehicle communication protocols such as CAN, J1939, or similar embedded communication networks. - Understanding of embedded software development methodologies, coding practices, and software lifecycle processes. - Strong organizational, analytical, and problem-solving skills. - Ability to communicate effectively and work within a multidisciplinary engineering team. Preferred Qualifications - Experience using Simulink Stateflow or other model-based design tools. - Knowledge of embedded communication interfaces and network protocols. - Experience interpreting electrical schematics and supporting hardware/software integration activities. - Hands-on experience debugging embedded software on target hardware. Desired Qualifications - Experience performing Hardware-in-the-Loop (HIL) and Software-in-the-Loop (SIL) testing. - Background developing embedded software for commercial vehicles or other mobile equipment. - Familiarity with continuous integration and automated build environments. - Experience using version control systems and collaborative software development tools. Preferred Technical Skills - Embedded C and C++ - Firmware development - Model-Based Design (MBD) - MATLAB, Simulink, and Stateflow - AUTOSAR architecture - CAN, J1939, ISOBUS, and LIN communication protocols - Visual Studio or comparable development environments - Agile or Scrum software development methodologies - Hardware debugging tools such as emulators and logic analyzers - Control systems engineering - Test-driven development (TDD) - Embedded systems architecture and software integration Salary Range: $70,000-75,000 The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Software Engineer role focused on embedded and controls software development for automated commercial equipment and multi-functional hardware systems. The position involves working with cross-functional engineering teams to design, test, debug, and maintain real-time embedded software using C programming. Candidates should have strong embedded systems expertise, RTOS experience, and deep knowledge of microcontroller hardware. 🗂️ Requirements: Bachelor's degree in Computer Science or Electrical Engineering, 6+ years of engineering experience, Strong C programming skills, Experience with Real Time Operating Systems, Deep understanding of microcontroller hardware, Extensive embedded programming experience at hardware level, Ability to write technical and end-user documentation, Solid software design and debugging skills, Experience with RLL programming, GitHub utilization 📃 Skills: C, RTOS, Microcontrollers, Embedded, GitHub, RLL, CAN, Modbus, Serial, NEC, UL508A 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. As Software Engineer you will be responsible for; - Collaborate closely with an international team of Software Engineers, as well as Mechanical, Electrical, and Design Engineers. - Analyze user requirements and control systems. - Analyze, define, and develop software test procedures. - Research, design, and write Controls software for automated commercial equipment. - Develop and/or modify existing programs by analyzing and identifying potential improvements. - Plan, architect, and execute additions to a comprehensive codebase for multi-functional hardware systems. - Create technical specifications and write user-facing operational documentation. - Provide technical support by responding to questions, making suggestions, and analyzing equipment. - Experience writing code to interface with machine hardware (I/O modules, motors, sensors, etc.) – nice to have - Familiarity with industrial communication protocols (serial, CAN, Modbus) - nice to have Qualifications; - Bachelor's degree in Computer Science or Electrical Engineering - 6+ years of engineering experience, or equivalent combination of education and experience - Strong C programming skills are a must – only use C, coachable profiles okay - Experience with Real Time Operating Systems- homegrown RTOS. - Deep understanding of Microcontroller Hardware - Extensive knowledge of embedded programming down to the hardware level - Ability to write technical and end user documentation - Solid software design and debugging skills - RLL programming and GitHub utilization - Familiarity with National Electrical Code (NEC) and UL508A a plus Salary Range: $95,000 - $150,000 The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Software Engineer role focused on embedded and controls software development for automated commercial equipment and multifunctional hardware systems. The position involves working with cross-functional engineering teams to develop, test, debug, and maintain low-level software using C and RTOS environments. This onsite role in Arvada, CO offers a salary range of $95,000–$150,000. 🗂️ Requirements: Bachelor's degree in Computer Science or Electrical Engineering, 6+ years of engineering experience, Strong C programming skills, Experience with Real Time Operating Systems, Deep understanding of microcontroller hardware, Extensive embedded programming experience, Ability to write technical and end-user documentation, Solid software design and debugging skills, Experience with RLL programming, GitHub utilization 📃 Skills: C, RTOS, Microcontrollers, Embedded, GitHub, RLL, CAN, Modbus, Serial, NEC, UL508A 🏢 Description: As Software Engineer you will be responsible for: - Collaborate closely with an international team of Software Engineers, as well as Mechanical, Electrical, and Design Engineers. - Analyze user requirements and control systems. - Analyze, define, and develop software test procedures. - Research, design, and write Controls software for automated commercial equipment. - Develop and/or modify existing programs by analyzing and identifying potential improvements. - Plan, architect, and execute additions to a comprehensive codebase for multi-functional hardware systems. - Create technical specifications and write user-facing operational documentation. - Provide technical support by responding to questions, making suggestions, and analyzing equipment. - Experience writing code to interface with machine hardware (I/O modules, motors, sensors, etc.) – nice to have - Familiarity with industrial communication protocols (serial, CAN, Modbus) - nice to have Qualifications: - Bachelor's degree in Computer Science or Electrical Engineering - 6+ years of engineering experience, or equivalent combination of education and experience - Strong C programming skills are a must - Experience with Real Time Operating Systems - Deep understanding of Microcontroller Hardware - Extensive knowledge of embedded programming down to the hardware level - Ability to write technical and end user documentation - Solid software design and debugging skills - RLL programming and GitHub utilization - Familiarity with National Electrical Code (NEC) and UL508A a plus Salary Range: $95,000 - $150,000 Location: Onsite in Arvada, CO The actual salary offered is dependent on various factors including, but not limited to, location, the candidate's combination of job-related knowledge, qualifications, skills, education, training, and experience. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. Drug Screening Requirement: All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Software Development Engineer role focused on automation and operational excellence, including CI/CD pipeline development, testing automation, and improving system reliability. The position involves streamlining engineering operations, automating workflows, and implementing scalable solutions in cloud environments. 🗂️ Requirements: 5+ years of software engineering experience, Experience with CI/CD tools, Experience with integration testing and automation frameworks, Proficiency in Python or Java, Understanding of AWS, GCP, or Azure, Experience using AI tools for developer productivity 📃 Skills: Python, Java, Jenkins, GitHub, GitLab, AWS, GCP, Azure, CI/CD, Automation, Testing 🏢 Description: As a Software Development Engineer (Automation & Operational Excellence) you will be responsible for: We are hiring a Software Development Engineer focused on operational excellence. This role will drive automation of manual workflows, improve system reliability, and build robust CI/CD and testing pipelines. Responsibilities: - Automate manual processes and operational workflows - Build and maintain CI/CD pipelines - Develop integration and end-to-end testing frameworks - Improve system reliability, observability, and deployment processes - Collaborate across teams to streamline engineering operations - Identify inefficiencies and implement scalable solutions Qualifications: - 5+ years of software engineering experience - Strong experience with CI/CD tools (e.g., Jenkins, GitHub Actions, GitLab CI) - Experience with integration testing and automation frameworks - Proficiency in Python, Java, or similar languages - Understanding of cloud platforms (AWS, GCP, or Azure) - Experience using AI tools to enhance developer productivity Salary Range: $105,000 – $135,000 All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Electrical engineering role focused on designing and developing embedded hardware systems and PCBs for industries including medical devices, aerospace, UAVs, and industrial controls. The position involves end-to-end electronics design, debugging, verification, and collaboration within multidisciplinary engineering teams. Hybrid role in Westminster, CO with opportunities to support customer-facing project scoping and design reviews. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or Computer Engineering, 3+ years of electrical engineering experience, Experience with embedded systems design and PCB layout, Knowledge of microcontrollers, processors, or FPGAs, Experience with high-speed or RF design technologies, Experience with communication interfaces, Knowledge of DC/DC converters and power topologies, Experience with EMI/EMC and signal integrity analysis, Experience with analog and sensor interface design, Hands-on PCB troubleshooting and debug experience, Eligibility to work as a US Person (citizen or permanent resident) 📃 Skills: FPGA, PCB, Embedded, Microcontrollers, Processors, SerDes, PCIe, I2C, SPI, UART, RS-232, RS-485, USB, SDIO, CAN, MIL-STD-1553, LVDS, DC/DC, EMI, EMC, Oscilloscopes, LogicAnalyzers, SpectrumAnalyzers, RF, 802.11, 10GbE 🏢 Description: Summary: As a member of the electrical team, you will work in multi-disciplinary project teams to architect and develop systems for markets including consumer products, medical devices, space systems, unmanned aerial vehicles, and industrial controls. You will collaborate with senior electrical engineers and other disciplines to deliver electronics designs and products from concept through verification. How You Will Spend Your Time: Design Work - Design hardware architectures, power budgets, electrical block diagrams, schematics, and PCBs - Own designs from start to finish including layout, bring-up, debug, documentation, and verification - Participate in regular design reviews - Occasionally travel to customer sites for project kickoffs or deliveries Sales Support - Support account managers and project managers in bidding and scoping projects - Visit customer sites to discuss technical capabilities when needed Who You Are: - Able to quickly learn new skills and technologies - Comfortable owning designs through the complete lifecycle - Strong attention to detail and adaptability - Effective collaborator within multidisciplinary teams Minimum Qualifications: - Design and layout experience including several of the following: - Microcontrollers, processors, and FPGAs in embedded systems - Controlled impedance for high-speed channel design or RF technologies (10GbE, 802.11, SerDes, PCIe) - Communication interfaces including I2C, SPI, UART, RS-232, RS-485, USB, SDIO, CAN, MIL-STD-1553, and LVDS - DC/DC converters and power topologies - EMI/EMC and signal integrity analysis - Analog and sensor interface design - Lab troubleshooting and debug experience of PCB assemblies using oscilloscopes, logic analyzers, network analyzers, spectrum analyzers, and related equipment Education and Experience: - Bachelor's degree in Electrical Engineering or Computer Engineering from an accredited university - 3+ years of experience Location: Hybrid in Westminster, CO Salary Range: $90K - $140K The actual salary offered depends on job-related knowledge, qualifications, skills, education, training, and experience. Note: - Due to the nature of the work, only US Persons (citizens or permanent residents) may apply - Pre-employment drug screening required as a condition of hire - Equal opportunity employer

🏢 Summary: Full-stack Software Engineer role focused on designing, developing, and integrating scalable cloud-based applications across front-end and back-end systems in an Agile environment. The position involves cloud deployment, database management, GUI development, and secure software practices. The engineer contributes across the full software development lifecycle to deliver reliable, high-quality solutions. 🗂️ Requirements: Bachelor's degree in Computer Science, Software Engineering, or related field, 5+ years of software development experience, Strong programming skills in Java, Python, and/or C++, Experience with front-end and back-end development, Hands-on experience with AWS, Azure, or Google Cloud, Experience with SQL and NoSQL databases, Experience working in Agile (Scrum or Kanban) environments, Experience with GUI development frameworks, Knowledge of cybersecurity best practices and secure coding standards 📃 Skills: Java, Python, C++, AWS, Azure, GoogleCloud, SQL, NoSQL, Scrum, Kanban, GUI, Cloud, CI/CD, DevOps, Microservices, DistributedSystems, Cybersecurity 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.Bachelor's degree in Computer Science, Software Engineering, or related technical field. Minimum 5+ years of experience in software development. This position is focused on the design, development, and integration of scalable software solutions within a modern full-stack environment. The role involves working across both front-end and back-end systems, supporting application development, cloud integration, database management, and GUI development. The engineer will collaborate with multidisciplinary teams in an Agile environment to deliver high-quality, secure, and maintainable software solutions. The position requires strong programming expertise, problem-solving capabilities, and the ability to contribute across the full software development lifecycle. Key Responsibilities : Full-Stack Software Development Design, develop, test, and maintain software applications across front-end and back-end environments Develop scalable and maintainable software solutions aligned with project requirements Participate in software architecture and system integration activities Support application enhancements throughout the software development lifecycle Cloud Integration & Deployment Support deployment and integration activities within cloud platforms such as AWS, Azure, or Google Cloud Collaborate on cloud-based application architecture and service integration Ensure system scalability, reliability, and performance across distributed environments Support cloud deployment and maintenance activities GUI Development Develop and maintain graphical user interfaces using modern development frameworks and tools Ensure usability, responsiveness, and performance of user-facing applications Collaborate with teams to improve interface functionality and user experience Support GUI enhancements and issue resolution activities Database Management Work with SQL and NoSQL database technologies for data storage and retrieval Support database integration, optimization, and performance improvements Ensure data integrity and efficient access across applications and systems Assist with data modeling and database maintenance activities Agile Development & Collaboration Participate in Agile development processes including Scrum and Kanban methodologies Collaborate with software engineers, technical leads, and cross-functional stakeholders Support sprint planning, backlog refinement, and code review activities Contribute to continuous improvement initiatives within the development process Cybersecurity & Issue Resolution Apply cybersecurity best practices during software design and implementation Support secure coding standards and software quality initiatives Analyze and troubleshoot complex technical issues Conduct root cause analysis and support corrective actions Documentation & Communication Create and maintain technical documentation related to software development activities Communicate technical topics, project updates, and issue resolution clearly to stakeholders Support knowledge sharing and collaboration across teams Ensure proper tracking of development activities and technical issues Profile : Software engineer with strong full-stack development experience and solid programming fundamentals Comfortable working in Agile environments with cross-functional technical teams Strong analytical mindset with the ability to troubleshoot and resolve complex software issues Self-motivated, adaptable, and capable of managing multiple priorities effectively Effective communicator with collaborative and problem-solving oriented approach Must Have : 5+ years of experience in software development Strong programming skills in Java, Python, and/or C++ Experience with both front-end and back-end development Hands-on experience with cloud platforms (AWS, Azure, or Google Cloud) Experience with SQL and NoSQL database technologies Experience working within Agile methodologies (Scrum / Kanban) Strong analytical, troubleshooting, and problem-solving skills Good communication and collaboration abilities Experience with GUI development frameworks and tools Knowledge of cybersecurity best practices and secure software development Good to Have : Experience with cloud-native application architecture Experience with DevOps or CI/CD environments Exposure to distributed systems or microservices architecture Experience working in large-scale enterprise or automotive environments Knowledge of software performance optimization and scalability practices Experience with modern UI/UX best practices and responsive design principles ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: The role focuses on embedded hardware design for automotive electronic control units, covering schematic and multilayer PCB layout, EMI/EMC compliance, vehicle network integration, and system-level architecture. It involves hardware debugging, thermal management, and participation in design reviews for advanced automotive systems such as ADAS and infotainment. 🗂️ Requirements: BS/MS in Electrical, Electronics, Computer or Aerospace Engineering, Automotive industry experience (Tier1/Tier2 preferred), Experience in embedded electrical design, Knowledge of EMI/EMC design, testing and troubleshooting, Understanding of ISO 26262 and automotive standards, Experience with vehicle networks (CAN, LIN, ETH, LVDS), Minimum 2 years schematic and PCB layout design, Experience with high-complexity multilayer PCB design, Ability to perform hardware debugging using lab equipment, Knowledge of ECU thermal management 📃 Skills: Altium, CAN, LIN, Ethernet, LVDS, ISO26262, EMI, EMC, PCB, ECU, ADAS, Infotainment, GPU, CPU, NPU 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow.Basic Qualifications BS / MS in Electrical, Electronics, Compute, Aerospace Engineering, or equivalent Experienced in automotive industry. (TIER1/TIER2 preferred) Experience in embedded electrical designs Familiar with EMI/EMC design, test and troubleshooting Familiar with electrical architecture topologies, Functional Safety (ISO 26262) and other industry standards Solid understanding of system/component design Familiar with vehicle bus, e.g. ETH/CAN/LIN/LVDS, communication protocols and troubleshooting tools Experience in thermal management of ECU embedded electronics Ability to participate and lead schematic and layout design reviews Good knowledge of state-of-the-art hardware systems, software tools and algorithms for interfaces required for actuators, firmware development, in-vehicle bus architectures, in-vehicle CPU/GPU/NPU computing platforms, image and audio signal processors, connectivity Knowledge of ADAS, Infotainment Systems and Zonal Architectures, Software defined vehicles Being able to support more than one expertise domain is a plus Power Integrity and Signal Integrity experience is a plus Experience in an architectural hardware/system role is a plus Should have experience in: Min 2 Yrs. Schematic and Layout design Experience in Altium is a big plus High complex multilayer layout design PCB design rules PCB to Mechanical interface and constraints HW debugging, investigations, problem solving with electrical lab equipment ALTEN Technology is an Equal Opportunity Employer. Our Policy is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: Electrical Engineer role focused on designing and developing electrical systems for robotic platforms, including schematics, PCB layouts, prototyping, and system integration. The position involves hardware bring-up, debugging, testing, and cross-functional collaboration to ensure reliable product performance. Offers a competitive salary range and opportunity to work on advanced engineering projects. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related field, Experience with electrical design, prototyping, and debugging, Experience working with hardware systems, Familiarity with lab tools (oscilloscopes, multimeters, power supplies, logic analyzers), Ability to perform testing and validation activities, Strong problem-solving skills, Ability to work in a fast-paced development environment 📃 Skills: PCB, Schematics, Debugging, Prototyping, DVT, Oscilloscopes, Multimeters, PowerSupplies, LogicAnalyzers, EmbeddedSystems, Sensors, Actuators, MotorControl, BenchTesting, SystemIntegration 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. As an Electrical Engineer you will be responsible for; Design and develop electrical systems and circuits for robotic platforms, including schematics, PCB layouts, and system integration. Support prototype builds, including wiring, bring‑up, debugging, and validation of hardware systems. Troubleshoot and resolve electrical and system-level issues during development and testing. Assist with Design Verification Testing (DVT) and other validation activities to ensure product performance and reliability. Collaborate cross‑functionally with mechanical, embedded software, and systems engineering teams to ensure seamless system integration. Perform bench testing, data collection, and analysis to evaluate system performance and identify improvements. Document designs, test results, and troubleshooting findings to support development and future production. Qualifications; Bachelor's degree in Electrical Engineering or related field. Experience with electrical design, prototyping, and debugging (robotics or hardware systems preferred). Familiarity with lab tools such as oscilloscopes, multimeters, power supplies, and logic analyzers. Exposure to embedded systems, sensors, actuators, or motor control is a plus. Experience with testing and validation (DVT or similar) is preferred but not required. Strong problem‑solving skills and ability to work in a fast‑paced development environment. Salary Range: $120k-$170k All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.

🏢 Summary: The offer is for an Electrical Engineer responsible for designing and developing electrical systems for robotic platforms, including schematics, PCB layouts, system integration, and hardware validation. The role involves prototype support, troubleshooting, design verification testing, and cross-functional collaboration with mechanical and embedded software teams. It is suited for candidates with strong hands-on experience in electrical design, debugging, and lab-based testing within fast-paced development environments. 🗂️ Requirements: Bachelor's degree in Electrical Engineering or related field, Experience with electrical design, prototyping, and debugging, Ability to design schematics and PCB layouts, Experience troubleshooting hardware and system-level issues, Familiarity with lab tools (oscilloscopes, multimeters, power supplies, logic analyzers), Experience supporting prototype builds and system bring-up, Ability to perform testing and validation activities (DVT or similar), Ability to document designs and test results 📃 Skills: PCB, Schematics, Debugging, DVT, Oscilloscope, Multimeter, PowerSupplies, LogicAnalyzers, EmbeddedSystems, Sensors, Actuators, MotorControl, BenchTesting, SystemIntegration 🏢 Description: We're ALTEN Technology USA, an engineering company helping clients bring groundbreaking ideas to life—from advancing space exploration and life-saving medical devices to building autonomous electric vehicles. With 3,000+ experts across North America, we partner with leading companies in aerospace, medical devices, robotics, automotive, commercial vehicles, EVs, rail, and more. As part of the global ALTEN Group—57,000+ engineers in 30 countries—we deliver across the entire product development cycle, from consulting to full project outsourcing. When you join ALTEN Technology USA, you'll collaborate on some of the world's toughest engineering challenges, supported by mentorship, career growth opportunities, and comprehensive benefits. We take pride in fostering a culture where employees feel valued, supported, and inspired to grow. As an Electrical Engineer you will be responsible for; Design and develop electrical systems and circuits for robotic platforms, including schematics, PCB layouts, and system integration. Support prototype builds, including wiring, bring‑up, debugging, and validation of hardware systems. Troubleshoot and resolve electrical and system-level issues during development and testing. Assist with Design Verification Testing (DVT) and other validation activities to ensure product performance and reliability. Collaborate cross‑functionally with mechanical, embedded software, and systems engineering teams to ensure seamless system integration. Perform bench testing, data collection, and analysis to evaluate system performance and identify improvements. Document designs, test results, and troubleshooting findings to support development and future production. Qualifications; Bachelor's degree in Electrical Engineering or related field. Experience with electrical design, prototyping, and debugging (robotics or hardware systems preferred). Familiarity with lab tools such as oscilloscopes, multimeters, power supplies, and logic analyzers. Exposure to embedded systems, sensors, actuators, or motor control is a plus. Experience with testing and validation (DVT or similar) is preferred but not required. Strong problem‑solving skills and ability to work in a fast‑paced development environment. Salary Range: $120k-$170k All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, age, genetic information, or pregnancy. Please beware of job seeker scams and see this important notice on our careers page for more information about our recruiting process. Compliance Notice: Alten USA is a federal contractor subject to the requirements of the Vietnam Era Veterans' Readjustment Assistance Act (VEVRAA) and Executive Order 11246. We are an Equal Opportunity Employer and consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Drug Screening Requirement: As a federal contractor, Alten USA maintains a drug-free workplace. All candidates selected for employment will be required to successfully complete a pre-employment drug screening as a condition of hire.